h22 headwork yes no
Thread Starter
Banned
Joined: Apr 2004
Posts: 3,798
Likes: 0
From: it was a funny angle
h22 headwork yes no
I will this simple
Jdm h22a- injen intake, tb bored, euro r intake manifold, an-r header, 2.5" exhaust.
I am for sure doing these mods. My question is how much power could i make additionally from a full port and polish, multiangle valve job and resurfacing head.
I would go through portflow(please dont hijack this thread and turn it into battle of machinists) I have heard 15 whp apprx from a good PnP. stock internals. ballpark waht could i expect to see from the pnp after these bolt ons. Thanks for your info/guess whatever.
Jdm h22a- injen intake, tb bored, euro r intake manifold, an-r header, 2.5" exhaust.
I am for sure doing these mods. My question is how much power could i make additionally from a full port and polish, multiangle valve job and resurfacing head.
I would go through portflow(please dont hijack this thread and turn it into battle of machinists) I have heard 15 whp apprx from a good PnP. stock internals. ballpark waht could i expect to see from the pnp after these bolt ons. Thanks for your info/guess whatever.
![](data:image/svg+xml;utf8,<svg xmlns='http://www.w3.org/2000/svg' viewBox='0 0 50 50'><circle class='avatar-circle-default' fill='%23e77a4e' cx='25px' cy='25px' r='20px'></circle><text class='avatar-text-default' x='49%' y='53%' fill='white' text-anchor='middle' alignment-baseline='middle'>"</text></svg>)
B*a*n*n*e*d
Joined: Aug 2003
Posts: 1,949
Likes: 0
From: GraffAngeles..., CMA, U.S.A
Re: h22 headwork yes no (JakeIsCool)
<FONT COLOR="red"> sorry for the OT but i was wondering what was needed in order for the Euro R intake manifold to fit properly on the JDM H head(non Type-S or non Euro-R)....and i was thinking mabey more than 15whp, a buddy of mine had a similar set up and gained 19whp 
good luck...</FONT>
good luck...</FONT>
Thread Starter
Banned
Joined: Apr 2004
Posts: 3,798
Likes: 0
From: it was a funny angle
Re: h22 headwork yes no (JDogg)
Yeah Im not doing cams, pistons, rods or anything. I figured I could spend that 1000 dollars on stuff like aluminum radiator, steel braided lines, helmet and other misc stuff.
Thread Starter
Banned
Joined: Apr 2004
Posts: 3,798
Likes: 0
From: it was a funny angle
Re: h22 headwork yes no (EJ-SQUADRON-1R...)
Actaully I havent purchased it yet. I just posted requesting info on the mods needed for the euro r intake manifold conversion and got 0 replies so Ill jsut wing it.
Honda-Tech Member
Joined: Jan 2002
Posts: 3,022
Likes: 0
From: South Florida
Re: h22 headwork yes no (JakeIsCool)
Here is my friend's thread. To let you know, turbogixxer did most of the install and his sister's boyfriend did the welding of the throttle body. Very good and informative thread.
https://honda-tech.com/zerothread?id=1019001
https://honda-tech.com/zerothread?id=1019001
Trending Topics
B*a*n*n*e*d
Joined: Aug 2003
Posts: 1,949
Likes: 0
From: GraffAngeles..., CMA, U.S.A
Re: h22 headwork yes no (Pat McGroin)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Pat McGroin »</TD></TR><TR><TD CLASS="quote">Here is my friend's thread. To let you know, turbogixxer did most of the install and his sister's boyfriend did the welding of the throttle body. Very good and informative thread.
https://honda-tech.com/zerothread?id=1019001</TD></TR></TABLE><FONT COLOR="red"> DAMN....thankz</FONT>
https://honda-tech.com/zerothread?id=1019001</TD></TR></TABLE><FONT COLOR="red"> DAMN....thankz</FONT>
Honda-Tech Member
Joined: Jan 2002
Posts: 5,690
Likes: 0
From: 13.9 at 101.76mph, 2420lbs, FL, USA
Re: h22 headwork yes no (JakeIsCool)
[QUOTE=JakeIsCool]I will this simple
Jdm h22a- injen intake, tb bored, euro r intake manifold, an-r header, 2.5" exhaust.
QUOTE]
wtf, are you trying copy my setup exactly?
Jdm h22a- injen intake, tb bored, euro r intake manifold, an-r header, 2.5" exhaust.
QUOTE]
wtf, are you trying copy my setup exactly?
Thread
Thread Starter
Forum
Replies
Last Post
