Something not loud at idle but sound's not to loud when you rev it. I want it to sound like stock but with a little deep note when you gas it. And it has to be 2.5 inch please.
1. apexi worldsport?

 

SMSP y0

 

So you're just looking for "better" sound? I think you can just get a different muffler to achieve that.

 

Fujitsubo

-Victor

 

I would have to vouch for the Apexi WS2, I have it even with out the cat, sounds wonderful. It is very quiet, the best thing it doesn't get louder the harder you drive it, at high RPM's the engine noise is greater from inside which I love

 

DC and Mugen Twin Loops

 

I know people with mugen twinloops and you can pick one up for about 250$ and sometimes even a lil better if you know where to look....Id look into that...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by P Nut &raquo;</TD></TR><TR><TD CLASS="quote">So you're just looking for "better" sound? I think you can just get a different muffler to achieve that.</TD></TR></TABLE> thats what i was thinking as well..not raspy, and a tad deeper. but as far as performance i would go with the mugen twinloop. but that doesnt even make much power.

 

Look into the DC Sports oval. It's a 2.25 exhaust like the stock exhaust, but with the bottlenecks removed. I have a used one for sale if you are interested.

 

stock itr

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TypeR0186 &raquo;</TD></TR><TR><TD CLASS="quote">Something not loud at idle but sound's not to loud when you rev it. I want it to sound like stock but with a little deep note when you gas it. And it has to be 2.5 inch please.</TD></TR></TABLE>

I can certainly recommend SMSP 2.5" exhausts if you have the time to get it.

He designed mine so that it dynos very well, but it looks completely stock from outside the car and is really quite reasonably quiet.

It's noisy enough inside the car that you'll worry about it until you hear somebody drive your own car past you on the track...then you'll realise it's not very noisy at all from outside the car.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Domino1984 &raquo;</TD></TR><TR><TD CLASS="quote">stock itr </TD></TR></TABLE>

Get's my vote.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Domino1984 &raquo;</TD></TR><TR><TD CLASS="quote">stock itr </TD></TR></TABLE>

and it comes with the car... it is 'free'.

 

Not the Thermal 3" exhaust. Speaking from experience.

 

magnaflow.com

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Lifter2012 &raquo;</TD></TR><TR><TD CLASS="quote">SMSP y0 </TD></TR></TABLE>

Fo' Sho'

 

i love my mugen twin loop... but its heavy as hell

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 97 TYPE-R 312 &raquo;</TD></TR><TR><TD CLASS="quote">Fujitsubo

-Victor</TD></TR></TABLE>

 

im thinking of switching to t1r cat back., im sure it should outflow my mugen...

those that have t1r and have heard twin loop, how much louder is the t1r?

 

This is (TypeR0186) how about this combo..........

magnaflow muffler
3inch inlet. 7inch long tip. they dont have a 2.5in inlet


And kteller 2.5in exhaust pipe kit and 14in Resonators and Carsound HF cat


I can't keep stock exhaust because i sold it wit the motor. plus it's not a 2.5in.
This is why i sold the motor.....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mugenr#1011 &raquo;</TD></TR><TR><TD CLASS="quote">those that have t1r and have heard twin loop, how much louder is the t1r?</TD></TR></TABLE>

I rock the T1R and it's a loud exhaust. The tone is deep and nice(not raspy)but when you get on it it's a screamer. I have only heard the TL through sound clips on here and T1R is louder by quite a bit at WOT.

 

open header sounds the best

 

Free = Stock

Some average $$$ = Fujitsubo but it's not true 2 1/2"

You could also look into the Kakimoto-R but it's kinda big and blingy lookin.

I think your best bet would be the SMSP or even Hytech for the diameter and sound level you desire.

FYI, Heres in interesting comparison of the SMSP and Hytech headers I just stumbled upon:
http://www.importreview.com/re....html

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by synik &raquo;</TD></TR><TR><TD CLASS="quote">

</TD></TR></TABLE>


&lt;&lt;&lt;&lt;&lt;&lt;so jealous..

 

mugen twin loop,
hytech,
RSR,