I new to the Prelude game and I want to know how to figure out the cel problem. I have a 92 si h23a. I though since it was obd1 that the cel would flash a series of times so I could figure out the problem that way but there were definitley no flashes! Could you guys please give a rookie some help?

Thanks guys

 

http://hondata.com/techecucodes.html

 

there is no blinking. so i think im just going to go down to the shop and have them look at the euc.

 

You have to jump the service connector behind the center console to get it to blink.

 

o, well i dont really know how to do that kinda stuff. But i just said screw it so i just took it down to a shop and paid a damn 60 buck for them to look at it and they just said i was my intake sensor connector, i geuss the wires fell out of it and the connector is like 10 buck to get. so all that mess and the part cost less then the dang diagnostic. well i geuss you live and learn. thaks for you guys help though.

 

where is it behind the console? is it easy to find? because a friend of mine has a 92 prelude and i kinda had the same question as Prelude-Tech. he has a CEL and i told him i would check it for him but i am used to civics. is it the same blink codes as any other OBD1 honda?

 

Right behind the radio...the blue 2-holed connector. Codes are very similar to other Hondas, but I wouldn't say 100% the same.

 

will i have to remove the radio? or can i access it without taking that out

 

You might be able to find it if you dig around back there. Try going in from the sides where the center console ends...

 

alright thanks.

SORRY TO THREAD JACK

 

O YA, just to let every body knowm, you can buy an OBD 1 diagnostic tester from shucks for about 30 buck then pay 60 to get it checked out. so be smart not a dumbass like me.

 

i just use a paper clip

 

how do you check 4ws error codes?

 

4ws is weird, i would like to knowo more about that.