I have these one piece headlights and I want to get the angel eyes working. There is a black wire and a red wire on each one. All the other stuff just plugs right in. There was no instructions included in the package so I dont know where these wires should be spliced into.

 

Although its sounds like u have a nice ride, Take cover!

 

usually black is a ground and red is for positive (power)!

i say dont bother with it and get some stock headlights...adding extra wires for gay foglights and angel eyes and such is ghetto

 

Plug em into a socket in the wall, see what happens. Make sure to post photos of the results

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FBPninetynineEM1 &raquo;</TD></TR><TR><TD CLASS="quote">usually black is a ground and red is for positive (power)!

i say dont bother with it and get some stock headlights...adding extra wires for gay foglights and angel eyes and such is ghetto </TD></TR></TABLE>

I like these headlights. Anyway, I have stocks sitting in the garage. I didnt waste money on these to just not put them on.

I know that the positive is red and negative is black but to what? Is it headlight or corner lamp or what?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bboyoxygen &raquo;</TD></TR><TR><TD CLASS="quote">

corner lamp</TD></TR></TABLE>

 

If you must know, hook it up with your parking light wire or an "additional switch".. It's not hard. Your parking light socket should consist of 3 wires. Turn on your parking lights and figure out which wire is POSITIVE ( + ) from the parking light and splice the red wire into that one. Black is self explanitory... GROUND

 

Nice, lets see pics of your car with the angel eyes installed.

 

you dont....