Looking for seats
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote">something comfy and race style</TD></TR></TABLE>
You'll be better of choosing one or the other honestly...and possibly giving a budget.
You'll be better of choosing one or the other honestly...and possibly giving a budget.
I would suggest a Bride Zeta III.
It's got some padding to it, non-reclinable full bucket seat.
Or you can try Bride Pro's.
It's leather so you get the comfiness and it's also non-reclinable and it's a perfect fit for the S2K.
It's got some padding to it, non-reclinable full bucket seat.
Or you can try Bride Pro's.
It's leather so you get the comfiness and it's also non-reclinable and it's a perfect fit for the S2K.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by T1R »</TD></TR><TR><TD CLASS="quote">I would suggest a Bride Zeta III.
It's got some padding to it, non-reclinable full bucket seat.
</TD></TR></TABLE>
Ive had the ZetaIII's in my civic. They were very comfy for being a bucket seat, I took them on road trips with no problem at all.
It's got some padding to it, non-reclinable full bucket seat.
</TD></TR></TABLE>
Ive had the ZetaIII's in my civic. They were very comfy for being a bucket seat, I took them on road trips with no problem at all.
Trending Topics
zeta 3's are great, but for s2000's, if you have zeta 3's you cannot open the glove compartment because the should bolsters stick out too much. Artis 3 and Artis 3 navi are basically the same thing as zeta 3's except the shoulder is shorter on one side, allowing you to open up the center glove compartment console. I recommend Bride Artis 3 and Artis 3 Navi Seats. Heres a pic of what my artis seats look like.

in this pic you can see that the zeta 3 in an s2000 will block the glove compartment from opening.

in this pic you can see that the zeta 3 in an s2000 will block the glove compartment from opening.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spooniq »</TD></TR><TR><TD CLASS="quote">how much with shipping. how old and with wat? </TD></TR></TABLE>
I'm asking $850.00 shipped. It's just the seat, no rails. You'll have to go to KingMotorsports or someone else that has Mugen stuff to get the rails for the S2k.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Young_R »</TD></TR><TR><TD CLASS="quote">mugen </TD></TR></TABLE>
You know it! For the few times that I did get to sit in the seat, it was ultimate!
Modified by ScreaminTeg at 12:02 PM 12/20/2004
I'm asking $850.00 shipped. It's just the seat, no rails. You'll have to go to KingMotorsports or someone else that has Mugen stuff to get the rails for the S2k.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Young_R »</TD></TR><TR><TD CLASS="quote">mugen </TD></TR></TABLE>
You know it! For the few times that I did get to sit in the seat, it was ultimate!
Modified by ScreaminTeg at 12:02 PM 12/20/2004
have you seen sparco fighters? they look pretty nice, but thats an opinion. and how are you guys rigin up the harnesses? with the aftermarket seats? do you have to get a roll cage?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Eh2 to Ap1 »</TD></TR><TR><TD CLASS="quote">i got memoryfab's. ill post pictures soon.</TD></TR></TABLE>
hey how do you like the memory fabs? what's the quality like?
hey how do you like the memory fabs? what's the quality like?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by I2ice0pride »</TD></TR><TR><TD CLASS="quote">have you seen sparco fighters? they look pretty nice, but thats an opinion. and how are you guys rigin up the harnesses? with the aftermarket seats? do you have to get a roll cage?</TD></TR></TABLE>
the sparco fighters do look nice. given the dimensions of the seat, they are pretty dead on with the rev II and looks like a good fit. if you are too wide, you might not be a good fit in this seat.
most will be fine with the factory three point belt. otherwise, a bar/cage would be necessary with a harness for optimal safety, especially on the road.
the sparco fighters do look nice. given the dimensions of the seat, they are pretty dead on with the rev II and looks like a good fit. if you are too wide, you might not be a good fit in this seat.
most will be fine with the factory three point belt. otherwise, a bar/cage would be necessary with a harness for optimal safety, especially on the road.
do you know if they have these seats in a large for my fat ***?....i know you can getthe zeta III type L for the larger people...is this the same with the artis and navi??
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Eh2 to Ap1 »</TD></TR><TR><TD CLASS="quote">i got memoryfab's. ill post pictures soon.</TD></TR></TABLE>
what rails did u use??? possible to use mugen rails since these seem to sit the lowest??
what rails did u use??? possible to use mugen rails since these seem to sit the lowest??
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2slow2function »</TD></TR><TR><TD CLASS="quote">nice mugen seat</TD></TR></TABLE>
buy me
buy me
sorry i don't think they have artis in type L. i could be wrong about that. you could get the zeta 3 type L's and remove the center console and save some weight. also if you move the seat up enough on the zeta 3's, i think you can open the compartment.
Thread
Thread Starter
Forum
Replies
Last Post
Audipwr1
Road Racing / Autocross & Time Attack
18
Apr 14, 2003 09:37 AM



