My turboed R has a front mount intercooler thus preventing me from inserting the licene plate holder into the grill area. Are there any other ways I can somehow mount my front license plate on my usdm type R bumper? Is there a special license plate holder made by Acura that can be used to mount my front plate?

 

some duct tape should do the trick....

 

there is a bracket from acura but I only use half of it anyway

 

**** that sux...here in tx your "supposed" to have one...nobody does

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BS 22 &raquo;</TD></TR><TR><TD CLASS="quote">here in tx your "supposed" to have one...nobody does</TD></TR></TABLE>

Same in Illinois. Just leave it off. Keep it in the trunk and if you're stopped, tell them it fell off. (It helps to have it in the car, in case they're worried that you're using the second plate on another car.)

 

Slick trick

 

I have an extra front bracket if you need one.

 

Get 4 suction cup hangers from your local hardware or crafts store and stick the plate inside the front windshield facing forward, obviously.

I have mine this way on the lower passengers side so it can be taken out quickly and easily with no tools needed. I haven't had an issue yet.

[knocks on Bbasso's head for luck]

 

Yeah thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bbasso &raquo;</TD></TR><TR><TD CLASS="quote">Yeah thanks </TD></TR></TABLE>

av a mayt

 

dude, you live in cali, its almost as bad as burglary!

i got harassed, got a ticket for no front liscense plate, forgot to pay it "Failure To appear" and it turned into a ~$600.00 ticket... sucks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PY Type R &raquo;</TD></TR><TR><TD CLASS="quote">My turboed R has a front mount intercooler thus preventing me from inserting the licene plate holder into the grill area. </TD></TR></TABLE>

the front license does not go into the grill area. use the 2 bolt holes in the bumper and mount the tag with 2 bolts.

or move to N.C./S.C. where no front tag is required.

 

Yeah just bolt it through the bumper (there's no way your intercooler sticks forward that much).

Tweak, who sticks it back to the People's Republic of Maryland by having his laser jammer mounted to his front plate

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tweakmeister &raquo;</TD></TR><TR><TD CLASS="quote">Yeah just bolt it through the bumper (there's no way your intercooler sticks forward that much).

Tweak, who sticks it back to the People's Republic of Maryland by having his laser jammer mounted to his front plate

</TD></TR></TABLE>

 

I refuse to put a front plate on. I'l take the ticket.


Actualy, I have, 3 times

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by opie &raquo;</TD></TR><TR><TD CLASS="quote">I refuse to put a front plate on. I'l take the ticket.


Actualy, I have, 3 times </TD></TR></TABLE>

Me too! Oh wait, we only have rear plates in SC.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by opie &raquo;</TD></TR><TR><TD CLASS="quote">I refuse to put a front plate on. I'l take the ticket.


Actualy, I have, 3 times </TD></TR></TABLE>

ditto... 2 times and counting

front plates are teh suck

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by opie &raquo;</TD></TR><TR><TD CLASS="quote">I refuse to put a front plate on. I'l take the ticket.


Actualy, I have, 3 times </TD></TR></TABLE>

I did not even know front plates existed, I just thought I got two rear plates.

 

In the states where it's mandatory to have a front plate like TX, just shave off the place to mount it like I did and keep it under your passenger's side floor mat. Blame it on the manufacturer for not having a place to mount it .

 

move to quebec, no front liscence plates they're ugly as hell

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mugen Type R &raquo;</TD></TR><TR><TD CLASS="quote">move to quebec, no front liscence plates they're ugly as hell</TD></TR></TABLE>
living in quebec &lt; putting front plates on



penpen: who is from c0rnwall on the QC border

 

I got some license plates made for me by a advertising comp.
Very cheap replacement, but you might get acused for document fraud. (aleast here in Norway)

I`ve mounted it with tape w/ some strong "thingy that kids tie their shoes with". (Dunno what the english word is)
Works really well. It wont fell of, and its very easy to take off at events etc.

 

velcro =

 

its pretty simple.. just use the top 2 bolts on the bumper.. its not going anywhere.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by extrah &raquo;</TD></TR><TR><TD CLASS="quote">I got some license plates made for me by a advertising comp.
Very cheap replacement, but you might get acused for document fraud. (aleast here in Norway)

I`ve mounted it with tape w/ some strong "thingy that kids tie their shoes with". (Dunno what the english word is)
Works really well. It wont fell of, and its very easy to take off at events etc.

</TD></TR></TABLE>

Hey what kind of fog lights are those??? Those aren't factory are they? never seen those before. looks like the ones from a JDM EF9 bumper.