im replacing my stock speakers on my 5th gen lude with aftermarket ones, and i took the speaker out and there is an adapter connected to the wires that would fit the stock ones but will not fit the kenwoods i bought. i figured i could just cut hte connector and solder it on buy there are 4 wires. (are there just 2 positives and 2 negatives). Or is there some kind of adapter it could connect the the stock adapter to fit the new speakers.

i need help

 

The reason there is more than 2 wires is because of the acoustic feedback system. You just need to go through and test the wires, two have power running to them the other two i just cut and taped off. Im not sure about the colors of the wires though, maybe someone else can help with that. Also, your talking about the front speakers right?

 

I dont understand what ItalynStylion said why would you find the the two wires with power and use both. Doesn't the negative post of the speaker go to a wire that doesn't have power.

 

Your right i worded that wrong, only one has power. But what i meant to say is only 2 of the 4 wires make the speaker work and you need to test them to figure out which ones they are. Sorry about the confusion