88-91 CRX's with Bseries swaps. which would you pick?

 

My old DC sucked.. I love my ITR header. Metal was too thin, I crunched it up pretty good. The JDM ITR header is built a LOT stronger.

 

yeah ive also heard that the jdm header will give you the most power out of all of them

 

DC Sports...gives top end and it is rather inexpensive.... I wont waste too much money on headers ..

 

Hasport??? no love for theirs?

I actually did put a tiny scrape in it! Ahh, gotta be more careful.


JDM= smashed if you aint real careful, i'd rather be able to whip the car around town more carelessly

 

i didnt know that hasport made headers. and dc sports dont really cost that much. i think apexi is the most exspensive. ive found them for as much as $620. im persoanlly thinking about going greddy.

 

chikara makes pretty cheap ones. under $200.

 

ebay header, ssautochrome, around $100 bucks, work good for me

 

definatley gonna go with ebay on this one, same shape, it gets the job done just as good on the dyno and it is about 400$-1,000$ cheaper than the list of brand names you posted....its all the same thing man

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by efniner91 &raquo;</TD></TR><TR><TD CLASS="quote">.its all the same thing man</TD></TR></TABLE>

No, it isn't man.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LSVTEC 91 Civic &raquo;</TD></TR><TR><TD CLASS="quote">No, it isn't man.</TD></TR></TABLE>
it is if you dont know what you're talking about

 

first off:

http://bob123e.tripod.com/thegreatheadertest/

everyone should bookmark this page

 

i really like my comptech header

 

As far as the headers you have listed, I like the Apexi header. It has better ground clearance than the 4-1s, but it behaves like one because of the really long primaries. If you order the JDM one, you can get a 2.5inch collector also. Do it right once unless you are trying to get a SMSP or something later.

https://honda-tech.com/zerothread?id=886841 That is a pretty sweet header and it is cheap.

 

comptech sounds nice. its pretty too!

 

What about the AN-R header?

 

if you want the real bling... SMSP headers rock!

 

Tannabe came out with B16 Header as well

 

Know one established a price range they are willing to spend. About 95% of the EF community probably can't afford a SMSP header or hytech header for that matter. How much are you guys willing to spend?
Zerolift, dynamic, ITR, JDM DC sport 4-1. These are probably your best bet without spending a hard and a leg.
I have a regular dc sport header on my car now and it sucks, waste of money.

 

ive heard that the Stocked B16 headers are better then alot of the aftermarket

 

im going to with cikara also. strong, flow well, esp at high rpms.

 

I dont' know much about headers cause i dont plan on being n/a for long, but besides the hasport header, do any of these other headers come with 2 o2 bungs for us pre-obd guys?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FrankencrxBHAM &raquo;</TD></TR><TR><TD CLASS="quote">im going to with chikara also. strong, flow well, esp at high rpms. </TD></TR></TABLE>

i think i'll be going with one to after i get a swap into my ed3. is the tork step model good?

 

when u guys say the jdm itr header...you mean the stock one? does the integra header make more power on the b16?

 

I love my Spoon Sports 4-1 JDM header it is the **** looks just like aJDM ITR one but the secret is on the porting inside I guess that is why it cost $700 plus huh??