i just did a swap on my ef hatchback. i put a 99 y8 engines with a zc tranny and i'm having trouble getting a long shaft axle to work in my tranny and since the engine is a US model i cant use my intermediate axle that worked before. i tried making a d-b series longshaft with a gsr tip but the gsr tip wasnt long enough. what should i do?

 

Maybe a 1G integra Intermediate shaft and axels? Im not sure or use your
ZC Midshaft w/ 1G integra Axels?

 

I had a ZC engine/tranny combo in a my EF. You will need a ZC intermediate shaft and 90-93 integra axles.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mar778c &raquo;</TD></TR><TR><TD CLASS="quote">I had a ZC engine/tranny combo in a my EF. You will need a ZC intermediate shaft and 90-93 integra axles. </TD></TR></TABLE>

Correct. I know hmotors has ZC intermediate shafts in stock.

 

were can i get a parts list for zc engines.so i could make a costom bracket for the intermediate shaft of the alternator mount.

 

if u order an zc intermediate shaft from hmotors specifically ask them to remove whatever part of an axles is left in the shaft from where it was torched off in a japanese junkyard....i got one from them that has been thru hours of beating, a automotive school, 3 machine shops and 1 auto repair shop to remove the part that was left in there, none of which worked. im not knockin hmotors, actually theres no other shop i would do business with besides them

 

I'll tell you where you can put your long shaft...Turboed_Ef, you sexy thang.

 

bump for jasons axle prob

 

or you can just run stock DX/Si axles with b series inner joints

it saved me alot of headaches looking for stuff...