Hey guys, I have a few customers that have some items they need to unload so I thought I would post them here for everyone. I also have some items that are display pieces that we can sell at a one time only discounted price. Items are in great condition, usually brand new, but not in their original packaging. I will keep updating this page as new items are listed and sold. All items are sold " AS IS " with no implied warranty. All warranty claims MUST go through the manufacturer. Here we go.

Quick List
1. AEBS 83 mm sleeved block ( brand new )Price Reduced, SALE Pending
2. Golden Eagle Mfg. Billet 3 main girdle w/ dowels ( new, but was a display piece. Never installed )
3. Used, but in great condition 7.250" Tilton Carbon/Carbon clutch with a matching Tilton Billet Steel Honda B-Series flywheel
4. 100 MM Stoker B-series crank! Done the right way!

__________________________________________________ _____________________

Item #1
B18C1 AEBS sleeved block ( sale pending )
Matching main caps
AEBS main studs
Line bored and honed
It is 83 mm now, but it has a little surface rust so it must go to 83.5 or 84 mm bore. ( not included )
It has an O-ring groove. I will supply the wire, but you must install it after you get it honed.
It has NEVER been run since the sleeves were installed. Just sat around in a shop. It has been cleaned and inspected to be good. Ready to ship!!!
It is missing the oil squirters and front water galley plug, but they are cheap and easy to order from your dealer.




<U> $1000 FIRM </U> Shipping not included. I can ship UPS anywhere!
Payments accepted : PayPal, Personal Check, Business Check, sorry, no credit cards for this item. Item ships the SAME day the funds clear!!!!

---------------------------------------------------------------------------------------------------

Item #2
3 MAIN GIRDLE - With Dowels B16 - B18A/B - B20
Golden Eagle Main girdle with dowels give easy alignment of girdle in the factory B16, B18A/B or B20 block without any machine work for the dowels.
Brand New, never used!
Display model. Not in packaging, but product is perfect.


Notes:
Must be used with 6 Acura GSR ( B18C ) main bolts, GSR baffle pan, GSR oil pickup and GSR oil pan, Can be purchased directly from Golden Eagle Mfg. or any of it's dealers nationwide.
All girdles MAY require block align boring AFTER install!



<U> $200.00 FIRM </U> Shipping not included. I can ship UPS anywhere!
Payments accepted : PayPal, Personal Check, Business Check, sorry, no credit cards for this item. Item ships the SAME day the funds clear!!!!

---------------------------------------------------------------------------------------------------

Item #3
7.250" Tilton Carbon/Carbon B-series clutch with a matching Tilton Billet Steel Honda B-Series flywheel. This is a used set-up, but it is in great shape and ready to race!
S1 or Y1 ready!

<U> $2700.00 </U> Shipping not included. I can ship UPS anywhere!
Payments accepted : PayPal, Personal Check, Business Check, sorry, no credit cards for this item. Item ships the SAME day the funds clear!!!!

---------------------------------------------------------------------------------------------------

Item #4
100 mm stoker b-series crank! With an 84 mm bore it will make your block a 2.217L !!!
Custom pistons and rods must be used!
Done by LOPEZ crank, the best in the biz!
Re-nitride treated for long life!

<U> $850.00 </U> Shipping not included. I can ship UPS anywhere!
Payments accepted : PayPal, Personal Check, Business Check, sorry, no credit cards for this item. Item ships the SAME day the funds clear!!!!

__________________________________________________ _____________________

If you have any questions, please PM me or e-mail at Vince@goldeneaglemfg.com Thanks

Vince Tiaga



Modified by GoldenEagleMfg.com at 10:13 AM 12/21/2004

 

are those aebs sleeves ok for driving around as a daily driver or will they over heat for street use?

 

I am not able to comment on the block abilities or qualities. Please contact AEBS for their information concerning these blocks. Thanks

 

Holy crap 150 for itr cams..

 

How about a price on a B18A shortblock, Eagle rods, 81.5mm ~8.9 comp dome top Arias pistons. I'm currently looking around at prices for a built bottom end for when (it's bound to happen, I can't keep my foot off the pedal) I grenade my stock one. Thanks.

-Dave

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91TegLS &raquo;</TD></TR><TR><TD CLASS="quote">How about a price on a B18A shortblock, Eagle rods, 81.5mm ~8.9 comp dome top Arias pistons. I'm currently looking around at prices for a built bottom end for when (it's bound to happen, I can't keep my foot off the pedal) I grenade my stock one. Thanks.

-Dave</TD></TR></TABLE>
PM'ed!

 

Bump,you got Pm

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ar2d2 &raquo;</TD></TR><TR><TD CLASS="quote">Bump,you got Pm</TD></TR></TABLE>
PM Replied. Thanks for the free bump

 

bump for awesome products

 

Thank you very much

 

here's a bump for vince.
-thomas

 

Thanks

 

Bump for that sleeved geezer block and great prices.--- Someone buy that thing!

 

Thanks!
TTT

 

do you have any other gsr sleeved blcok.. does not have to be complete, bare block wil do.. PM me thanks

 

I have a GSR block that is sleeved, used to be a deckplate, but is now back to stock configuration. New Golden Eagle Mfg. HD sleeves, new decking, stock bore but can go up to 85 mm, and it is line bored. Bead blasted, the thing looks brand new!
$1200.00

I can bore and hone it also if you have pistons or you can order the pistons through Golden Eagle!


Modified by GoldenEagleMfg.com at 8:49 AM 1/3/2005

 

thats some crazy stroke crank...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Speedz &raquo;</TD></TR><TR><TD CLASS="quote">thats some crazy stroke crank...</TD></TR></TABLE>

100 mm = A lot of powwa! I have used the set-up before and it made some really good numbers!!! Great race motor geometry!

 

what length rods? and how far is wrist pin raised in pistons? deckplate?

 

No deckplate. I have all the dimensions at work. Hit me up tomorrow!

 

do you have any pix on the tilton? how many runs were made on the clutch?

 

I will try to get pics soon. Thanks

 

TTT

 

is the block still available, its been pending for the past couple weeks.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lsvtecvx &raquo;</TD></TR><TR><TD CLASS="quote">is the block still available, its been pending for the past couple weeks.</TD></TR></TABLE>

It is pending until I get the $ in my hand. IT is supposed to be in the mail to me now. I do have another brand new sleeved GSR ( B18C1 ) block ready to go. Golden Eagle Mfg. HD sleeves freshly installed