Finally some makes traction bars for the integra DA see link :

https://honda-tech.com/zerothread?id=1038306

DA is supposed to be the same as the 1991 JDM civic/crx with the b16a in it from the factory. ( i still don't know how to call it is it 1991 civic siR ????)

There are some pics but it looks a little different than my car so i was hoping people could tell me if it would fit/work on my car. (i have a jdm civic vtec)

 

The cross member could be the same I don'T know

But the radius rods are really not the same

NIce X member

 

so than i can't use it ?????

 

Some more input please ??

 

Z10 Makes a DA Kit.. Its been out for months, and its def not the same as a
EF Kit. Diff size arms little diff adapters and a diff crossmember.

 

z10 and full-race.com make traction bars for DAs. place racing also makes a front crossmember for the DA

 

ef kit is not for jdm vtec civic

 

i will get the guy who makes these to post in this thread...

 

Looks like jim fabb but he doesn't make them for the ee8/ee9.

Are these from england ???

 

That X-member above the one that "looks like a jim fab" is made for me by a guy I know that builds race car suspension & chassis for a living

I guess your Dutch by your location? I will be sending some parts over to Holland soon ish for a guy called Bart with a blue mrk 2 CRX VT (siR)

PM me I I'll see if we can sort out getting you one sent with his

BillB

 

Yes i know bart he is in the same honda club as i am i sent yuo a pm thanks !!

 

@ Bill B How much does those traction bars cost?

Do you have any test results from those Traction bars? like 60ft etc?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Johnny G &raquo;</TD></TR><TR><TD CLASS="quote">

i will get the guy who makes these to post in this thread... </TD></TR></TABLE>

Without having heim joints at both ends arent you going to have to remove the 2 bolts on the control arm when you want to adjust them?