ok GUYZ I HAVE A 91 DX HATCH NOW I JUST BAUGHT A D15 V-TEC NOW I WAS TOLD I COULD KEEP MY STOCK ECU AN WIRE HARNESS HOW CAN I RUN V-TEC?PLEASE LET ME KNOW ASAP EMAIL ME AT civicdemon91@hotmail.com

 

an if possible anyone have pictures? an how to do it?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civicdemon91 &raquo;</TD></TR><TR><TD CLASS="quote">ok GUYZ I HAVE A 91 DX HATCH NOW I JUST BAUGHT A D15 V-TEC NOW I WAS TOLD I COULD KEEP MY STOCK ECU AN WIRE HARNESS HOW CAN I RUN V-TEC?PLEASE LET ME KNOW ASAP EMAIL ME AT civicdemon91@hotmail.com</TD></TR></TABLE>

First lets start off with english and no caps.. Baught = Bought if you were
going to run a OBD1 VTEC D15 you should run a VTEC ECU and do the
propper wiring. Also try doing a search this has been covered 102 times.

Use your wiring harness get a p28 ecu ( sohc vtec 92-95 ) and bolt it all
up and run proper wires for vtec..

 

Send me teh V-TECH PHONE y0!

 

i like this one

 

excuse me buddy. i was new to the site damn all i asked for was a answer if it was such a bother to you don't answer back

 

:SEARCH:

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civicdemon91 &raquo;</TD></TR><TR><TD CLASS="quote">excuse me buddy. i was new to the site damn all i asked for was a answer if it was such a bother to you don't answer back</TD></TR></TABLE> welcome to Honda-tech were half of your questions get answer by idiots that doesnt know what common sense is!!


Modified by ZCPOWERED at 12:43 PM 11/23/2004

 

you'll still need to use the search function and better research the swap you are planning on doing. i'm not sure but i think the dx is dpfi so if it is you'll need to do the mpfi swap first. there are different ways to do it as you'll find when you search more. don't get discouraged from using this board. it is a very useful thing in a crunch. just do a lot of reading and use the hell out of the search function. there is also an FAQ at the top of this forum. alot of these things have been covered in there.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JapJunkie &raquo;</TD></TR><TR><TD CLASS="quote">i like this one

</TD></TR></TABLE>

thats a good one.

 

I was just busting ***** yeah you will have to do the DPFI to MPFI search on that.. I for some reason thought this was 92-95 related. wrong forum

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by QUiKSR20 &raquo;</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE> hey i have that phone!

 

obd0 to obd1 harness and wire the harness to accept a 4 wire o2 sensor, or maybe try a b16 ecu and chip it with a p28 maps and not to look for a knock sensor.