Some jackass came up my driveway and hacked the whole tip off my ITR exhaust as well as ripped off my sideskirts and front lip. I put on a set of steelies. But as for the exhaust I'm thinking about just fabricating a new tip and welding it on at my friends shop. So I'd greatly apprciate it if someone could measure the diameter of the exhaust tip as well as getting a protractor or something else to measure the angel that it was cut at. Thanks in advance for all your help!

 

they took the stock tip of the oem exhaust???

that sounds really hard to do since it's welded...


Sorry about the incident, good luck on the repair.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bbasso &raquo;</TD></TR><TR><TD CLASS="quote">they took the stock tip of the oem exhaust???

that sounds really hard to do since it's welded...


Sorry about the incident, good luck on the repair.</TD></TR></TABLE>

I assume since he said "hacked" that they sawed it off???

 

What a sad bunch of losers...cutting off an exhaust tip when $3 would have bought them a tip at any accessory shop...if they had taken the complete muffler i coul dhave half understood, but just the tip....sad and pathetic!!

 

lol its just really funny and sad to think of someone sitting behind the car sawing a fking tip of the exhaust off. What morons.

 

This has gotta be one of the funniest threads I have seen awhile. Who would sit there and saw off an OEM tip?

 

SCANLESS!

Now wtf are you going to do with a tip that has been sawed off just stupid and disrespectful.

Sorry to hear but good luck in your repairs

 

ya tell me about it. i couldn't believe it myself. ya and its sawed off. who the hell in their right minds would do that?? f'ing tards. I'm just gonna go down to a parts store and buy a new tip. Can someone give me the angel that it was cut and the diameter? It would help out a lot. Thanks.

 

Are you for real? What is someone going to do with an exhaust tip. Bahhh, I am having trouble believing this so please post pics.

 

Its a very steep angle, i cant say for sure but i'd say about 80-85degrees....you'll have a fair idea yourself when you see some for sale on what looks like it and what doesnt.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by no show no go &raquo;</TD></TR><TR><TD CLASS="quote"> Can someone give me the angel that it was cut and the diameter? It would help out a lot. Thanks.</TD></TR></TABLE>

Just went and measured. The angle is 60° (or 120° depending upon how you look at it). The outer diameter is 3".

 

your the greatest! thanks man i <U>really </U>appriciate it.