FS: SMSP 4-1 B Series Deck Plate Header
Thread Starter
Honda-Tech Member
Joined: Nov 2000
Posts: 5,135
Likes: 0
From: Fredericksburg, VA, USA
FS: SMSP 4-1 B Series Deck Plate Header
This is a 4-1 mild steel uncoated stepped primary header. The primaries are 1-3/4" x 1-7/8" with a 3" welded formed collector. The header was built to be used on a 1/2" deck plate engine. There is no flange on the collector. The header has been used but only on the dyno and some trips down the track. I'll post pictures later.
$550 as is or $600 with 3" flex pipe welded on.
Reduced to $500 and $550
540-287-6384
Modified by SMSP at 2:39 AM 11/24/2004
Modified by SMSP at 2:39 AM 11/24/2004
$550 as is or $600 with 3" flex pipe welded on.
Reduced to $500 and $550
540-287-6384
Modified by SMSP at 2:39 AM 11/24/2004
Modified by SMSP at 2:39 AM 11/24/2004
Trending Topics
Honda-Tech Member
Joined: May 2003
Posts: 4,201
Likes: 0
From: Phoenix, Arizona, United States
Re: FS: SMSP 4-1 B Series Deck Plate Header (Bbasso)
Deck plate is a piece of billet that adds to the deck height of the block. I think it's for long rod motors. Makes the hood close funny.
Very good deal on the header! free bump.
Very good deal on the header! free bump.
Honda-Tech Member
Joined: May 2003
Posts: 4,201
Likes: 0
From: Phoenix, Arizona, United States
Re: FS: SMSP 4-1 B Series Deck Plate Header (SnoFlake)
Me neither. How much ground clearence would there be installed on a non-deck plate motor?
Modified by asubennett at 12:22 PM 11/28/2004
Modified by asubennett at 12:22 PM 11/28/2004
B*a*n*n*e*d
Joined: Mar 2002
Posts: 529
Likes: 0
From: san antonio, tx, usa
Re: FS: SMSP 4-1 B Series Deck Plate Header (SMSP)
hey is this one of your headers on ebay.... http://cgi.ebay.com/ebaymotors...%3AIT
looks very damn similer. i might bid if it is....
looks very damn similer. i might bid if it is....
Thread Starter
Honda-Tech Member
Joined: Nov 2000
Posts: 5,135
Likes: 0
From: Fredericksburg, VA, USA
Re: FS: SMSP 4-1 B Series Deck Plate Header (oerski)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by oerski »</TD></TR><TR><TD CLASS="quote">hey is this one of your headers on ebay.... http://cgi.ebay.com/ebaymotors...%3AIT
looks very damn similer. i might bid if it is....</TD></TR></TABLE>
No it's not and that's not a "burns" style collector either.
Here's a couple pictures of the header on a stock B18 block.
looks very damn similer. i might bid if it is....</TD></TR></TABLE>
No it's not and that's not a "burns" style collector either.
Here's a couple pictures of the header on a stock B18 block.
Thread
Thread Starter
Forum
Replies
Last Post
1320DRAGWORKX
Southern California (Sales)
16
Oct 13, 2007 04:58 AM
EdBoon
Northern California (Sales)
7
Sep 24, 2006 04:14 PM
