I was told by someone that you can wire a USDM H23 wiring harness to work on a JDM H22 engine with internal ignition coil. I was told to just cut the connector off that would nornally connect to the external coil on the H23 and solder the black wire to the black and yellow wire and just tie the blue wire away. Is this true? Thanks for your help!!

 

Does anyone know???? The car is done with the swap other than this part and I need to know what to do. Anyone???

 

search on this, in the civic forums theres a write up on how to do it......h22a into ek/eg civic i think is the title name, its got an explanation in there.......use the same guidelines

i did this myself but i forget the exact wire colors and stuff, if you dont find anything i will go look on my car and ill be able to tell you....

 

Hey thanks for the reply. I searched but came up empty handed. Do you think you could check your car for me so i know how to do this? Thanks a lot for the help!!

 

you can also use your h23 dizzy and coil