Advanced Chassis Innovations: Rear Lower Tie Bars and Floor Braces - Free Shipping!
Thread Starter
Honda-Tech Member
Joined: Jul 2004
Posts: 619
Likes: 0
From: Southern California
Advanced Chassis Innovations: Rear Lower Tie Bars and Floor Braces - Free Shipping!
Order through our website and receive FREE SHIPPING through 12/01/04!
Advanced Chassis Innovations offers chassis reinforcement products for Honda and Acura applications.
Our bars and braces utilize aircraft-quality T6-6061 solid aluminum bars that are both lightweight and extremely rigid. Solid aluminum offers a far superior strength/weight ratio than hollow aluminum tubing, common to other manufacturers.
Additionally, we include extremely strong Grade 10.9 or equivalent hardware and high-quality rod ends. When ordering, you can choose between a high-gloss red or black powder coated finish that not only looks stunning, but is also much more durable than paint.
Photos:
Finish Options: http://chassisinnovations.com/34.php
Various Hardware: http://chassisinnovations.com/37.php
The following represents our current product line, which will be updated in the near future with additional products and applications.
Rear Lower Tie Bars:
94-01 Integra
90-93 Integra
92-95 Civic
93-97 del Sol
88-91 Civic/CRX
Our Rear Lower Tie Bar connects the rear control arms, effectively reducing chassis flex and improving both handling and steering response. This is a simple bolt-in installation with no drilling required.
Current applications include the 94-01 Acura Integra, 90-93 Integra, 92-95 Honda Civic, 93-97 Honda del Sol, and 88-91 Civic/CRX.
Our rear lower tie bar is compatible with both the stock swaybar and Integra Type-R swaybar. Additionally, our hardware allows the tie bar to clear the BSQ or Beaks subframe reinforcement kits if necessary.
-7/8" Solid Aluminum Bars (aircraft-quality T6-6061) with red or black powder-coated finish
-Grade 10.9 or equivalent hardware and high-quality rod ends
-Weighs less than 2.5 lbs
-Simple bolt-in installation; no drilling required
Photos:
http://chassisinnovations.com/25.php
Floor Trunk Brace:
94-01 Integra
92-00 Civic
93-97 del Sol
Our Floor Trunk Brace connects two points of the trunk floor, utilizing factory tapped holes in order to effectively reduce chassis flex and improve handling and steering response. This is a simple bolt-in installation with no drilling required.
Current applications include the 94-01 Acura Integra, 92-00 Honda Civic, and 93-97 Honda del Sol.
-7/8" Solid Aluminum Bars (aircraft quality T6-6061) with red or black powder-coated finish
-Grade 10.9 or equivalent hardware and high-quality rod ends
-No drilling required
-Weighs less than 2.5 lbs
-Simple bolt-in installation; no drilling required
Photos:
http://chassisinnovations.com/29.php
Rear Trunk Brace:
94-01 Integra 2dr except Type-R
Our Rear Trunk Brace connects two points of the trunk wall, improving upon the brace found stock on the USDM Integra Type-R. Drilling is required for installation.
Current applications include the 94-01 Acura Integra (2dr except Type-R).
-7/8" Solid Aluminum Bars (aircraft quality T6-6061) with red or black powder-coated finish
-Grade 10.9 or equivalent hardware and high-quality rod ends
-Drilling required for installation
-Weighs less than 2.5 lbs
Photos:
http://chassisinnovations.com/32.php
All parts can be ordered from http://chassisinnovations.com/products.php
We are PayPal verified and ship via USPS Priority w/ Delivery Confirmation.
Each order will arrive within 2-3 business days and will include all hardware required for installation, as well as a detailed installation guide.
Pricing is $79 for each individual bar, $139 for any two bars, and $199 for all three bars.
Order through our website and receive FREE SHIPPING through 12/01/04!
Modified by ChassisInnovations at 10:55 AM 11/16/2004
Modified by ChassisInnovations at 12:43 PM 12/24/2004
Advanced Chassis Innovations offers chassis reinforcement products for Honda and Acura applications.
Our bars and braces utilize aircraft-quality T6-6061 solid aluminum bars that are both lightweight and extremely rigid. Solid aluminum offers a far superior strength/weight ratio than hollow aluminum tubing, common to other manufacturers.
Additionally, we include extremely strong Grade 10.9 or equivalent hardware and high-quality rod ends. When ordering, you can choose between a high-gloss red or black powder coated finish that not only looks stunning, but is also much more durable than paint.
Photos:
Finish Options: http://chassisinnovations.com/34.php
Various Hardware: http://chassisinnovations.com/37.php
The following represents our current product line, which will be updated in the near future with additional products and applications.
Rear Lower Tie Bars:
94-01 Integra
90-93 Integra
92-95 Civic
93-97 del Sol
88-91 Civic/CRX
Our Rear Lower Tie Bar connects the rear control arms, effectively reducing chassis flex and improving both handling and steering response. This is a simple bolt-in installation with no drilling required.
Current applications include the 94-01 Acura Integra, 90-93 Integra, 92-95 Honda Civic, 93-97 Honda del Sol, and 88-91 Civic/CRX.
Our rear lower tie bar is compatible with both the stock swaybar and Integra Type-R swaybar. Additionally, our hardware allows the tie bar to clear the BSQ or Beaks subframe reinforcement kits if necessary.
-7/8" Solid Aluminum Bars (aircraft-quality T6-6061) with red or black powder-coated finish
-Grade 10.9 or equivalent hardware and high-quality rod ends
-Weighs less than 2.5 lbs
-Simple bolt-in installation; no drilling required
Photos:
http://chassisinnovations.com/25.php
Floor Trunk Brace:
94-01 Integra
92-00 Civic
93-97 del Sol
Our Floor Trunk Brace connects two points of the trunk floor, utilizing factory tapped holes in order to effectively reduce chassis flex and improve handling and steering response. This is a simple bolt-in installation with no drilling required.
Current applications include the 94-01 Acura Integra, 92-00 Honda Civic, and 93-97 Honda del Sol.
-7/8" Solid Aluminum Bars (aircraft quality T6-6061) with red or black powder-coated finish
-Grade 10.9 or equivalent hardware and high-quality rod ends
-No drilling required
-Weighs less than 2.5 lbs
-Simple bolt-in installation; no drilling required
Photos:
http://chassisinnovations.com/29.php
Rear Trunk Brace:
94-01 Integra 2dr except Type-R
Our Rear Trunk Brace connects two points of the trunk wall, improving upon the brace found stock on the USDM Integra Type-R. Drilling is required for installation.
Current applications include the 94-01 Acura Integra (2dr except Type-R).
-7/8" Solid Aluminum Bars (aircraft quality T6-6061) with red or black powder-coated finish
-Grade 10.9 or equivalent hardware and high-quality rod ends
-Drilling required for installation
-Weighs less than 2.5 lbs
Photos:
http://chassisinnovations.com/32.php
All parts can be ordered from http://chassisinnovations.com/products.php
We are PayPal verified and ship via USPS Priority w/ Delivery Confirmation.
Each order will arrive within 2-3 business days and will include all hardware required for installation, as well as a detailed installation guide.
Pricing is $79 for each individual bar, $139 for any two bars, and $199 for all three bars.
Order through our website and receive FREE SHIPPING through 12/01/04!
Modified by ChassisInnovations at 10:55 AM 11/16/2004
Modified by ChassisInnovations at 12:43 PM 12/24/2004
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
revautousa
Wheels, Tires, Brakes, and Suspension
66
Jul 9, 2005 10:55 AM
Jeff_B
Wheels, Tires, Brakes, and Suspension
65
Apr 2, 2005 11:15 PM
Jeff_B
Wheels, Tires, Brakes, and Suspension
2
Dec 26, 2004 03:48 PM
