Notices
For Sale General Classifieds For Sale

Racing Hart C2's 3 Piece w/ Nitto 450's 17" for sale

Thread Tools
 
Search this Thread
 
Old Nov 8, 2004 | 04:59 PM
  #1  
b15's Avatar
b15
Thread Starter
Honda-Tech Member
 
Joined: Feb 2004
Posts: 159
Likes: 0
From: South Jersey
Default Racing Hart C2's 3 Piece w/ Nitto 450's 17" for sale

Hello I have for sale a set of four Racing Hart C2's - these are real racing hart rims, not knockoff... These are 3 piece, but the center caps will not fit on with these lug nuts, so thats why you dont see the center caps in the picture, but I do have them and they will go to whoever buys the rims. I will include the lug nuts too.. The lug nuts cost me $40 at some specialty rim place in NJ... The rims have fairly new tires on them, they are Nitto's...450's. The front left tire has a patch in it from when i got a bolt in the tire but the tire was professionally repaired by STS for $21 and is perfectly fine and holding 30 PSI as recommended. I had these rims on my sentra for 4,500 miles. There is damage to the clear coat though, which is why I'm not looking for a ton of money for them. The clear coat can be redone by a rim store. This occured due to improper storage of the rims over the winter. The rim it is the worst on is the drivers side rear rim. If you look at the car from afar though, the rims don't indicate clear coat damage at all and look amazing. I've always taken great care of these rims aside from the damage that was caused by storing them in my basement over last winter. these were always polished with Meguiar's "HOT RIMS"...it removed most tar spots that would occur during the spring season, and made them gleam at the beach when spinnin' for the hunnies. These rims are $1,600 new - thats a lot.... The tread on the tires is as follows: Front: approximately 90-93% Rear: Approximately 88-90%.

NOTE: I will include a brand new Gorilla torque wrench to remove the lug nuts if the price is right, as well as a 17mm thin wall socket, which removes the lugs.

I'm REALLY hoping for local pickup for these in Whitehouse NJ area (will drive some) on the dates of November 22-November 28th...but, if not, I will ship these out to you somehow. Just make me an offer.

Bolt pattern is 4x114.4 i believe - these were on my Nissan sentra, 2000 GXE. 14's to 17's is a hell of a difference may I add.

These fit Civic's, Integra's, Accord I believe. and Nissan sentra's as you could tell by my car.

I received many, many compliments with these wheels even though they had the clear coat damage. I think this was the one mod that made my sentra look the best. Even gas station attendants who didn't speak english would try to tell me how much they liked them... post a reply here, or send me an email at server152@yahoo.com if you are interested.

please make a decent offer - no real price in mind at the moment.
I'm not opposed to selling my car with these rims on it - so I'm not 100% desperate to sell.




Old Nov 8, 2004 | 05:03 PM
  #2  
Greasemonkey's Avatar
 
Joined: May 2002
Posts: 762
Likes: 0
From: NEWARK, CA, USA
Default

My friend got the same set of C2 on his MR-2 and they do look sweet. Like you he has the problem with the clear-coat peeling also..
Old Nov 8, 2004 | 05:04 PM
  #3  
DarkBB4's Avatar
Honda-Tech Member
 
Joined: Jul 2004
Posts: 5,496
Likes: 0
From: San Diego CA
Default Re: (Greasemonkey)

interestd.. trade for other 4X114.3 rims + some cash?

located in Rochester NY
Old Nov 8, 2004 | 05:15 PM
  #4  
b15's Avatar
b15
Thread Starter
Honda-Tech Member
 
Joined: Feb 2004
Posts: 159
Likes: 0
From: South Jersey
Default Re: (DarkspeedVtec95)

have no use for other rims...selling the car and getting a XTerra.
Old Nov 8, 2004 | 05:42 PM
  #5  
TurboJesse
Guest
 
Posts: n/a
Default Re: (b15)

wheres the 3 peice rims?
Old Nov 8, 2004 | 06:18 PM
  #6  
b15's Avatar
b15
Thread Starter
Honda-Tech Member
 
Joined: Feb 2004
Posts: 159
Likes: 0
From: South Jersey
Default Re: (Mpir3)

if you could read you would read that i said that the center caps are not on at the moment but i have them in a box.
Old Nov 8, 2004 | 06:50 PM
  #7  
s.cali alan's Avatar
Honda-Tech Member
 
Joined: Apr 2004
Posts: 883
Likes: 1
From: CA, USA
Default

centercaps are not included in "3pc rims" those are c2 EVO. dumbass..
Old Nov 8, 2004 | 07:19 PM
  #8  
qcoffey's Avatar
Junior Member
 
Joined: Oct 2002
Posts: 879
Likes: 0
From: Baltimore, MD, USA
Default Re: (s.cali alan)

Agree with ^^^

Those are actually the RH Evolution C2's. They are 1 piece in design, center cap is not included in the multipiece designation for any rim. They are nice wheels though.
Old Nov 8, 2004 | 07:23 PM
  #9  
eg ferio's Avatar
Junior Member
 
Joined: Feb 2003
Posts: 767
Likes: 0
From: miami, fl, usa
Default Re: (s.cali alan)

yea those are the evo's

real c2's are these which are 3piece
Old Nov 9, 2004 | 11:51 AM
  #10  
b15's Avatar
b15
Thread Starter
Honda-Tech Member
 
Joined: Feb 2004
Posts: 159
Likes: 0
From: South Jersey
Default Re: (eg ferio)

bump.
Old Nov 13, 2004 | 04:21 PM
  #11  
Cliffjumper2's Avatar
Honda-Tech Member
 
Joined: Jan 2004
Posts: 5,400
Likes: 0
From: The Manor, NY
Default Re: (b15)

I'm looking for a set of nice wheels...I would have to paint these, and I'm not that interested in the tires

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by s.cali alan &raquo;</TD></TR><TR><TD CLASS="quote">centercaps are not included in "3pc rims" those are c2 EVO. dumbass..</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eg ferio &raquo;</TD></TR><TR><TD CLASS="quote">yea those are the evo's

real c2's are these which are 3piece
</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by qcoffey &raquo;</TD></TR><TR><TD CLASS="quote">Agree with ^^^

Those are actually the RH Evolution C2's. They are 1 piece in design, center cap is not included in the multipiece designation for any rim. They are nice wheels though.</TD></TR></TABLE>

I think these guys are right, but I'd still be interested in the wheels for a good price...PM with a price, thanks
Old Nov 15, 2004 | 06:14 PM
  #12  
b15's Avatar
b15
Thread Starter
Honda-Tech Member
 
Joined: Feb 2004
Posts: 159
Likes: 0
From: South Jersey
Default


my car from a distance with these shoes on.
Old Nov 16, 2004 | 05:41 PM
  #13  
Cliffjumper2's Avatar
Honda-Tech Member
 
Joined: Jan 2004
Posts: 5,400
Likes: 0
From: The Manor, NY
Default Re: (b15)

got your PM, and I PM'd you back
Old Nov 16, 2004 | 06:50 PM
  #14  
b17integra's Avatar
Honda-Tech Member
 
Joined: Dec 2003
Posts: 1,251
Likes: 0
From: sacramento, ca, usa
Default Re: (Cliffjumper2)

having a center cap doesn't make a rim a 3 piece. don't false advertise if you don't understand the term of a 3 piece wheel. you have a one piece wheel. also you have a dual lug pattern. do some reserch on your wheels before you even try to sell them. buyer's beware the guy doesn't even understand what he is selling.
Old Nov 16, 2004 | 06:55 PM
  #15  
NytRyder2k1's Avatar
Member
 
Joined: May 2002
Posts: 2,028
Likes: 0
From: City By The Bay, Ca, Usa
Default Re: (b17integra)

^^ LoL
Old Nov 16, 2004 | 07:26 PM
  #16  
aznxenon's Avatar
Junior Member
iTrader: (1)
 
Joined: Feb 2004
Posts: 703
Likes: 0
From: Arcadia, CA
Default Re: (NytRyder2k1)

http://www.pdm-racing.com/products/wheels_rh.htm

245 x 4 != 1600

These are ok nice wheels but you got 1 piece RH Evo, not 3 piece RH
Old Nov 16, 2004 | 07:41 PM
  #17  
N1NjA TuRtLE's Avatar
Member
 
Joined: Sep 2002
Posts: 4,212
Likes: 0
From: CA
Default Re: (b17integra)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b17integra &raquo;</TD></TR><TR><TD CLASS="quote">having a center cap doesn't make a rim a 3 piece. don't false advertise if you don't understand the term of a 3 piece wheel. you have a one piece wheel. also you have a dual lug pattern. do some reserch on your wheels before you even try to sell them. buyer's beware the guy doesn't even understand what he is selling.</TD></TR></TABLE>LOL so true
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Chaos2003
Northeast (Sales)
2
Oct 1, 2014 12:39 PM
imjrjr
For Sale
1
Jul 12, 2001 04:16 AM




All times are GMT -8. The time now is 02:01 AM.