will someone give me the order of torquing the IM into the head...whihc one first...mid-bottom, mid-top....etc

 

there is no torque sequence.

 

there is one .....sequence of torquing down all the bolts...from inside to outside something like that

 

i've never used a sequence when replacing intake manifolds.

but if you say so..

 

I didnt use a sequence when i put mine on, i dont think there is one.

 

there's one for your header.. but not sure about the IM

 

there is one.... if you dont have a diagram just use your best judgement by working your way from the middle out

 

welll for those who doesn't know the sequence...

pick a position where your view is.... for me...i stand at front of my car and bend over to look at the IM

here are the sequence of bolts (top has 5bolts and so bottom has 5)

1. top center
2. bottom center
3. left of top center
4. left of bottom center
5. right of bottom center
6. right of top center
7. right of #5 above
8. left of #3 above
9. last bolt on the right
10. last bolt on the left

 

ttt for those who curious to know about the sequences

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by yeegsr &raquo;</TD></TR><TR><TD CLASS="quote">welll for those who doesn't know the sequence...

pick a position where your view is.... for me...i stand at front of my car and bend over to look at the IM

here are the sequence of bolts (top has 5bolts and so bottom has 5)

1. top center
2. bottom center
3. left of top center
4. left of bottom center
5. right of bottom center
6. right of top center
7. right of #5 above
8. left of #3 above
9. last bolt on the right
10. last bolt on the left</TD></TR></TABLE>
great post
its nice to see the good help on this board, it needs it