Does anyone make performance cams for the d15b2

 

im sure lots of companys do.... frankly, too lazy to look...

i work in parts tho, and i know they do.

 

D16A6 cams will bolt in just fine. Just don't put a race cam in a nearly stock D15B2 or you'll run into some problems.

I had a stock A6 cam in my B7.

Check out the Gude cams, they make some pretty wicked SOHC cams.

 

would puttin in a cam from a 91 Si (D16A6) do anything????

Im about to sell one i have sittin in the closet on ebay.

 

yea a6 will help you and plop right in.

 

I had an A6 cam and AEM cam gear on my B7 and it pulled pretty dang hard. A pretty good improvement.

 

i've never heard of a twin cam single cam engine :S

 

I have a 272 gude cam in my a/6 with a d15b2 block of coarse the head is
built

 

ive got a gude stage 1 cam in my a6.. works nicely

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">i've never heard of a twin cam single cam engine :S
</TD></TR></TABLE>

What are you talking about? D15B2 is SOHC, D16A6 is SOHC, D15B7 is SOHC.... Please explain

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">Does anyone make performance cams for the d15b2</TD></TR></TABLE>

This is a little misleading, but anyone can figure that out... It is gramatically correct, but still kinda weird. The company makes cams....

Didn't mean to start English 101...

 

we have grinds for the D15b2 cams. similar profiles as the D16a6