fuel psi falling off at high rpms
Thread Starter
Honda-Tech Member
Joined: Aug 2004
Posts: 442
Likes: 0
From: east coast performance and tuning, jacksonville, nc
fuel psi falling off at high rpms
on the dyno ive noticed my fuel starts to fall off at 6200rpm. it falls about 15psi and the car starts to go lean. my set up is 255 walbro, aem fuel rail and 550 rc injectors. my question is, is the fuel pump lossing voltage or is the oem fuel line to small for 275hp to 300hp.
Joined: Aug 2004
Posts: 13
Likes: 0
From: Bethel, Ct., USA
Re: fuel psi falling off at high rpms (UJLSMoFo)
Wow, this is pretty funny. I had a Walbro quit on me. I substituted it with the Czech Motec recommended Bosch 0 580 254 044. This is largest single that Bosch makes, it is motorsport pump for Porsche. Motec approves it for 700 hp. It weighs about 4 pounds and is loud as hell, but it works.
Mine has never had a hiccup with 72 pound Siemens at 460 RWHP and 3.3 bar.
Mine has never had a hiccup with 72 pound Siemens at 460 RWHP and 3.3 bar.
Thread
Thread Starter
Forum
Replies
Last Post
2camsaam
Honda Civic / Del Sol (1992 - 2000)
4
Oct 5, 2002 10:03 AM