My friend has a 93 CX hatch with Jdm b18c (gsr) and he is looking into buying some new poly-urethane insert. He ordered the ones made by prothane and he ordered a kit for a gsr. The inserts should fit right?


Modified by EM2Civic at 5:21 AM 10/25/2004

 

TTTTT

 

yes i have the same car and swap

 

Thanks Mods can close now

 

all good

 

yes, actually i think all (B) dohc inserts are the same. (i think)

 

nope i know that the b16 and gsr inserts are diff, have a set of each sitting right here

to the original poster i beleive you need the civic mounts since i beleive for an eg you use the lower civic mounts to put the motor in...you should be able to find out 100% if you search

 

interesting, when i got my ES bushings all the packages said were B series DOHC and i put them in a 93 eg with a b16 - oh well i guess i was wrong for the first time

 

well when i did the swap in my 95 civic, i used the motor mounts in my car it shuck shuck for a few moths till the broke in now its not bad tho. but that was about 3yrs ago tho when i did my swap.

but when you go to buy the motor mount inserts some of the 92 to 95 mounts are the same as the 94 and up integra. if i am rong tell me. when my swap was done the box said 92 to 95 si/ex modal. i was not at the time thanking about doing a swap tho, but it came out perfect tho. went with prothane mounts.

its one of those things you may have to try them out to see if you like it. i know i love them
95 coupe b18c1

 

Install should be done in a couple weeks or during the winter season I'll let you know if I can get them in before it goes for storage. Thanks guys.