which is the best and gets the most performance or if there are any other types of headers which ones are good and not too expensive thanx

 

The JDM header has better clearance than the DC(I've heard they're horrible). I run the JDM and it works well for me. The best header, IMO, is the Toda. Hytech and SMSP also make outstanding products. They are all pricey but you get what you pay for.

 

JDM Header

Any DC crap

 

I have a Hytech and it's just incredible still need some tuning done to my car but like said before you get what you pay for.

 

T1R?? comments.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by damn4_rj &raquo;</TD></TR><TR><TD CLASS="quote">stock JDM, DC tends to run like sh*t</TD></TR></TABLE>

you don't give up eh??
anyway, i didn't know there was such biased opinions about the JDM DC. IMO, it works great and the only benefit about the JDM ITR header is that it has better ground clearance and a heat shield.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nightrider &raquo;</TD></TR><TR><TD CLASS="quote">anyway, i didn't know there was such biased opinions about the JDM DC. IMO, it works great and the only benefit about the JDM ITR header is that it has better ground clearance and a heat shield. </TD></TR></TABLE>

I agree. From a performance and value perspective, the DC Sports JDM 4-1 has the edge with it's slightly lower cost, larger primaries, lack of inner welds at the flange, and better collector.

 

bisimoto header ... ?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by People_Mover &raquo;</TD></TR><TR><TD CLASS="quote">Any DC crap </TD></TR></TABLE>



I bought my dc header for it's "bang for your buck factor" And it does just that.

 

thanx guys should i keep the stock JDM ITR header than or should i buy a new one or wouldnt that make any difference on performance

 

if you already have a JDM ITR header, i would see no reason for you to buy a JDM DC header. if you're going to upgrade, i would upgrade to something more performance oriented than the JDM DC such as the Toda or SMSP or Hytech.
btw, if you're wanting to buy any of the headers i mentioned, look at spending more than $600 for sure.

 

jdm is better just because of better ground clearence, but dc is still good

 

i bought the replica jdm itr 4-1 header and i'll be goin home to put it on to see if its any good.
$269 shipped so thats not bad. i hope it has good ground clearence.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nightrider &raquo;</TD></TR><TR><TD CLASS="quote">if you already have a JDM ITR header, i would see no reason for you to buy a JDM DC header. if you're going to upgrade, i would upgrade to something more performance oriented than the JDM DC such as the Toda or SMSP or Hytech.
btw, if you're wanting to buy any of the headers i mentioned, look at spending more than $600 for sure. </TD></TR></TABLE>

YUP!

 

alright fellas thanx i think im just going to keep the stock jdm header for now and then upgrade to a toda eventually

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CWTegRNo.160 &raquo;</TD></TR><TR><TD CLASS="quote">i bought the replica jdm itr 4-1 header and i'll be goin home to put it on to see if its any good.
$269 shipped so thats not bad. i hope it has good ground clearence.</TD></TR></TABLE>

oh no, i have seen the quality of the welds on HT recently and it looked HORRIBLE. you could have bought a JDM DC for that price.

right HURR: http://cgi.ebay.com/ebaymotors...=WDVW