like it says i want every part that is needed to run uberdata

 

http://www.moates.net

You will need an OBDI ECU
To prepare the ECU for Uberdata you will need this(If the ecu is a Virgin/unchipped)

UBER1 Uberdata modification kit--> $15
http://www.moates.net/product_...id=42
Thats everything you need to Socket/chip your ECU

Then you will need some EEPROMS(Chips)
http://www.moates.net/product_...id=38

those are $6 each

To burn the chips with the settings/desired tunning you need a Chip Burner. $85
http://www.moates.net/product_...id=48

Lastly, if you want to do datalogging you will need a Nokia Phone Cable that you can get at Radio Shack for $20

You Download the Uberdata program at athe Uberdata page..

Thats it.


Total investment in hardware--> $15 uber kit + $12(2 chips) + $85 chip burner + $ 20 dataloging cable(Optional) = $132 + shipping costs...

Go to the link there and order, have fun tunning.

 

Moates

 

yeah craig moates is a great guy. Just email him and tell him that you need everything to use uberdata and burn chips with. he'll write back a few hours.

 

uberdata sucks.

 

What exactly sucks about it ?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mademan2723 &raquo;</TD></TR><TR><TD CLASS="quote">What exactly sucks about it ?</TD></TR></TABLE>

installed everything today injectors etc.. and uberdata ls ecu.. idles no good does run to well over all. i need someone to help me tune it if anything. but i dont like it. when i was fmu and missing link fuel pump it ran better.

 

ever think because you aren't tuned and your timing is now retarded?

 

tried tuning it today w/ wideband still nothing at idle its soo rich and after the install idles very weird.

 

Might be a bad chipping job. Happens all the time. May want to check your connections. You may also want to try running a different version of uberdata as some versions have some bugs.

 

i think he's running 1.7

 

thanks for the link on Moates. this is kind of what I have been looking for.

 

run 1.66 .........1.7 has some bugs still i think

 

I think everyone should start out with the stable version first, and then run the experimental. Seems logical to me, I am going to run 1.7 this weekend to start some datalogging.