TESTING WATERS! FULLY BUILT TURBO LS VTEC MOTOR AND TRANNY! OFFER UP!
like it says testing waters on my LS VTEC built turbo motor has the following below, is currently on stand, fresh has not been runed yet since built, sitting in garage.....needs a home if i cant provide one for it...
91 b18a1 LS bottom, b16 head
Bottom: bored 2.0L
Darton open deck sleeves 2.0L crv, 20-25 psi rated
Crower pro billet rods
JE pistons 9-1 and rings
Type R oil pump
GSR water pump
Lightened crank pulley
LS vtec oil kit hooked up to head
balanced!!!!
Head:
Port and Polished to a mirror on the exhaust side intake was ported and polished also
Skunk2 valve springs and retainers titanium i believe
SS manley valves oversized .5 and 1 i believe for int/exh
No cams can get b16 cams if wanted
No intake or exhaust manifold or TB nor injectors nor fuel rail or pressure reg.
Tranny:
LS 91 integra
ACT 6 puck clutch kit 311 ft lb tq
ACT 12 lb flywheel
PG LSD installed
ask for pix u shall recieve!
considered trades: jdm h22 long block plus $
Modified by ExplicitSpeed at 2:14 AM 10/18/2004
Modified by ExplicitSpeed at 2:15 AM 10/18/2004
91 b18a1 LS bottom, b16 head
Bottom: bored 2.0L
Darton open deck sleeves 2.0L crv, 20-25 psi rated
Crower pro billet rods
JE pistons 9-1 and rings
Type R oil pump
GSR water pump
Lightened crank pulley
LS vtec oil kit hooked up to head
balanced!!!!
Head:
Port and Polished to a mirror on the exhaust side intake was ported and polished also
Skunk2 valve springs and retainers titanium i believe
SS manley valves oversized .5 and 1 i believe for int/exh
No cams can get b16 cams if wanted
No intake or exhaust manifold or TB nor injectors nor fuel rail or pressure reg.
Tranny:
LS 91 integra
ACT 6 puck clutch kit 311 ft lb tq
ACT 12 lb flywheel
PG LSD installed
ask for pix u shall recieve!
considered trades: jdm h22 long block plus $
Modified by ExplicitSpeed at 2:14 AM 10/18/2004
Modified by ExplicitSpeed at 2:15 AM 10/18/2004
sounds interesting... plz send pics Excelcivicsi@yahoo.com
the son and the heir
iTrader: (1)
Joined: Jun 2003
Posts: 13,698
Likes: 0
From: dreaming of the Gulf Coast, USA
Send pictures to macrosshn@hotmail.com and a price.
I want pics kctuner@cinci.rr.com
Trending Topics
send pics to 350zaccord@bellsouth.net would be interested in this for my crx
$2350 shipped for shortblock
$1400 shipped for head with b16 cams
complete longblock $3200 shipped with b16 cams
$1400 shipped for head with b16 cams
complete longblock $3200 shipped with b16 cams
Give me a call tomorrow at shop. Would like to talk about the motor.
Acur-It Honda Tech, Inc.
407-673-8324
george
Thanks
Acur-It Honda Tech, Inc.
407-673-8324
george
Thanks
I'm really intrested in the short block please send me pics and engine specs ring gap, ect ,who built it and so on
thanks
thanks


