alright i already have all of the parts needed. i just have a few questions. i bought a JDM B16A block thats in somewhat good condition. what do i use to clean the top of the pistons(the residue)? i know the compression will be higher than 10.2 because of the B18C1 head i am going to use, does anybody have any clue what the C/R would be? can i use a mugen head gasket or is it safe to use a 1 layer of the stock head gasket with copper spray on it?
<U>T|I|A</U>

 

i also need to know what application clutch i will need to buy. 1st gen block/95 gs-r tranny.
tia


[Modified by eg6_inspired, 4:55 PM 12/18/2001]

 

ttt

 

yes you can use a mugen gasket
just use a rag to remove the carbon buildup
and use a clutch for a 95 gsr!

 

FINALLY... thanx WAFFLES

 

89-91 B16A block w/GSR head + thin headgasket - CR should be approx 10.6

 

thanks KAT you da MAN



[Modified by eg6_inspired, 2:25 PM 12/19/2001]

 

no prob.