jg built b16 turbo motor! SPOON JG JE EAGLe, bored, honed, SLEEVED
going to try my second time at listing this
this motor has 4k miles on it since it was built, it was never boosted!
heres the features of this jg gen2 block
b16a by the way)
resleeved with iron/ductile sleeves
jg block brace
hot tanked
honed
81mm bore
eagle rods
je pistons 9-1
total seal rings
spoon sports oil pump
spoon sports thermostat
unorthodox underdrive pulley
stainless steel valves in the head
jg head gasket
new timing belt
clutch masters 7.5 pound flywheel
clutch master 6 puck stg3 clutch
clutch masters pressure plate
complete head
stainless steel valves
new valve seals
pace setter headers included
this motor is built to easily handle 40 psi of boost, jgenginedynamics.com built this motor and the quality is amazing, they told me that my motor can easily handle 40psi so im not going to argue with the folks who built this motor
i am selling this motor becaus i am buying my freinds civic hatchback since he is in need of selling for personal reasons and is giving me a smoking deal on it, im leaving the type r engine in the hatchback becaus i figure since i will have a nice clean civic i can wait on all my turbo dreams until the summer when i will have money for the turbo components and fuel management
the head is baby blue and the block is bright green becaus i thought it would be fun to have a motor that sticks out like a sore thumb, if anybody wants to make fun of it they can race this easy 500+ hp monster, also if the motor is stolen it will be easy to find, but if they strip the paint there are some very noticeable marks on the block,
located in portland oregon area
$2600 dollars(very good price considering the EXTENSIVE list of parts)







Modified by FatBoy4door at 6:05 PM 10/13/2004
Modified by FatBoy4door at 12:56 AM 10/14/2004
Modified by FatBoy4door at 11:41 PM 10/18/2004
this motor has 4k miles on it since it was built, it was never boosted!
heres the features of this jg gen2 block
b16a by the way)resleeved with iron/ductile sleeves
jg block brace
hot tanked
honed
81mm bore
eagle rods
je pistons 9-1
total seal rings
spoon sports oil pump
spoon sports thermostat
unorthodox underdrive pulley
stainless steel valves in the head
jg head gasket
new timing belt
clutch masters 7.5 pound flywheel
clutch master 6 puck stg3 clutch
clutch masters pressure plate
complete head
stainless steel valves
new valve seals
pace setter headers included
this motor is built to easily handle 40 psi of boost, jgenginedynamics.com built this motor and the quality is amazing, they told me that my motor can easily handle 40psi so im not going to argue with the folks who built this motor
i am selling this motor becaus i am buying my freinds civic hatchback since he is in need of selling for personal reasons and is giving me a smoking deal on it, im leaving the type r engine in the hatchback becaus i figure since i will have a nice clean civic i can wait on all my turbo dreams until the summer when i will have money for the turbo components and fuel management
the head is baby blue and the block is bright green becaus i thought it would be fun to have a motor that sticks out like a sore thumb, if anybody wants to make fun of it they can race this easy 500+ hp monster, also if the motor is stolen it will be easy to find, but if they strip the paint there are some very noticeable marks on the block,
located in portland oregon area
$2600 dollars(very good price considering the EXTENSIVE list of parts)







Modified by FatBoy4door at 6:05 PM 10/13/2004
Modified by FatBoy4door at 12:56 AM 10/14/2004
Modified by FatBoy4door at 11:41 PM 10/18/2004
Trending Topics
bump and a new picture, i set the head on to free up some garage space
im getting antsy for a type r, help me out
Modified by FatBoy4door at 12:35 AM 10/10/2004
im getting antsy for a type r, help me out
Modified by FatBoy4door at 12:35 AM 10/10/2004
bump bump bump, going on ebay soon
here is aemail i got from jg when i was talking about my motor to them
"DAVID
Those blocks with an 81 or 81.5 bore will go 40+ psi no problem. As for the turbo manifolds right now they are on back order.
Thanks jg"
keep in mind this is a 81mm bore so it can handle a lot A WHOLE LOT of power,
here is aemail i got from jg when i was talking about my motor to them
"DAVID
Those blocks with an 81 or 81.5 bore will go 40+ psi no problem. As for the turbo manifolds right now they are on back order.
Thanks jg"
keep in mind this is a 81mm bore so it can handle a lot A WHOLE LOT of power,
i guess im getting a bigger loan so i dont have to sell this yet
but im sure the payments will be overwhelming soon enough
so it is still for sale
but im sure the payments will be overwhelming soon enough
so it is still for sale
OMG that is gr8 the colors. when i build up my ls/vtec im going to paint them to match the car. good idea on the colors tho.
-Kyle
-Kyle


