i used to be a member on here, but my password got changed and somehow it wont send to my email??? dunno. so i have a new name. anyway as the title was saying.
ok boys, heres the deal.
i have had a couple dif. engines in this car before, but lets not get into that.
im am back to completely STOCK f22b2 OBDII running strong.
what i want to know is: (remember i am going to run a p14 OBDI ecu with a OBDII-OBDI jumper harness)
what all am i going to have to mutilate of my stock OBDII harness to work on the OBDI F22b DOHC.
i have heard stories about the crank angle position sensor that is originally on my f22b2 but not on the DOHC f22b.
and one more thing, should i run my stock f22b2 distributer with the f22b DOHC or should i use a OBDI for the f22b DOHC???
thanks a lot for the help, im in a bind, and my mind has went blank this past few days.


-jeremy
greatly appreciated!

 

The DOHC F series is the F20b , not the F22

 

actually there is a DOHC f22 that came in the prelude SI (and the F20C is DOHC too to be technical)

http://www.accordinglydone.com...ies=F

F22B Prelude Si 92-96 160 148 9.2:1 85 95 DOHC 2156 JDM

 

ahh see i knew this was going to happen!
TO THE PEOPLE THAT DONT KNOW ABOUT THIS ENGINE! PLEASE DONT POST!
I KNOW ALL ABOUT THIS ENGINE, AND IF YOU WANT TO< SEARCH!!!

as you all were
i need to know this pretty fast...becuase im doing it next weekend, and i need to know if i need to buy any sensor clips or anything. thanks!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spooledu &raquo;</TD></TR><TR><TD CLASS="quote">I KNOW ALL ABOUT THIS ENGINE</TD></TR></TABLE>

Good to know we have an expert on the F22b DOHC

 

lets be a smartass.
im not asking for your opinion on what you think, i want people that have knowledge about this engine to help me, not people that are like uhh...uhh that engine doesnt exist...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spooledu &raquo;</TD></TR><TR><TD CLASS="quote">lets be a smartass.
im not asking for your opinion on what you think, i want people that have knowledge about this engine to help me, not people that are like uhh...uhh that engine doesnt exist...
</TD></TR></TABLE>

Question 1 from me.

If you stated this: <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spooledu &raquo;</TD></TR><TR><TD CLASS="quote">
I KNOW ALL ABOUT THIS ENGINE</TD></TR></TABLE> then shouldnt you already know the answer to your own question?

 

If you want people to help you, don't be a ***** about it. Try that for starters.

 

people do make mistakes....so lets try to be a little patient. just becaue someone doesnt know that particular engine doesnt mean they cant help you....hell...TxTuner might know an *** load more about engines than you do and could have the answer to your problem....show respect for people and they will show respect for you....thats the only way youll get help/make friends on this board

anyway my ***** are bigger than all of yours

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by madd &raquo;</TD></TR><TR><TD CLASS="quote">

anyway my ***** are bigger than all of yours </TD></TR></TABLE>

ummmmm.... i beg to differ

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Legendaryyaj &raquo;</TD></TR><TR><TD CLASS="quote">

Question 1 from me.

If you stated this: then shouldnt you already know the answer to your own question? </TD></TR></TABLE>

Didn't think of that but that is a VERY valid point

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FatJoe &raquo;</TD></TR><TR><TD CLASS="quote">ummmmm.... i beg to differ </TD></TR></TABLE>

Second that

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by madd &raquo;</TD></TR><TR><TD CLASS="quote">

anyway my ***** are bigger than all of yours </TD></TR></TABLE>

ever heard of elphantitis?

 

lol true true....tis scary

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bagged93accord &raquo;</TD></TR><TR><TD CLASS="quote">ever heard of elphantitis? </TD></TR></TABLE>

HaHaHa.......


Now's who's got the biggest *****

 

*pukes*

 

there really is an f22b1 motor for the accord and prelude. i have it in my car. its dohc non-v-tech and they arent bad for the buck. the guy just wants some help and all u guys can do is talk crap so shut up and quit posting on here. answer his question if u can. if not dont bother him. as far as help goes i have a 90 accord so its a different swap. sorry i cant help.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by madd &raquo;</TD></TR><TR><TD CLASS="quote">actually there is a DOHC f22 that came in the prelude SI (and the F20C is DOHC too to be technical)

http://www.accordinglydone.com...ies=F

F22B Prelude Si 92-96 160 148 9.2:1 85 95 DOHC 2156 JDM </TD></TR></TABLE>

read please

 

back on topic:
ok, i wasn't tryin to bitch about it, he just was making it sound stupid like i knew all about this engine.
the fact that i know all about this engine doesn't solve the ? about my problem. this goes for the same thing with swapping OBDI engines in OBDII chassis for the most part.
im simply asking what all has to be converted besides the ECU, and the OBDII-OBDI jumper harness.
i was asking like do i need to use the f22b DOHC OBDI dizzy, and do i have to rewire the crank angle pos. sensor or do i let it hang due to converting to OBDI. those are the main things i need to know.

so...does anyone have the answers to these ?'s.?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by f22b4me &raquo;</TD></TR><TR><TD CLASS="quote">there really is an f22b1 motor for the accord and prelude. i have it in my car. its dohc non-v-tech and they arent bad for the buck. the guy just wants some help and all u guys can do is talk crap so shut up and quit posting on here. answer his question if u can. if not dont bother him. as far as help goes i have a 90 accord so its a different swap. sorry i cant help.</TD></TR></TABLE>
umm...no. I have a f22b1 from a 95 accord in my prelude, and its a sohc vtec, but maybe there is something I am missing here??

 

it only came in the prelude si

*i* would think that you would use the dizzy that came on the motor...as for the crank angle position sensor i dont see why that would change going from obdI to obdII, but i could be ignorant. have you tried doing a search for an obdII h22 swap into say a 5th gen? im sure the same principles would be applied. but i would honestly think that you would use the dizzy that came with the motor....

 

ok, i had a OBDII H22 in my car recently, and sold it, my car is OBDII from the factory.
this f22b DOHC is a OBDI engine, so i am converting to OBDI, and the crank angle pos. sensor is not on the f22b DOHC OBDI engine, are atleast not were it is on the f22b2 engine.

 

also, do i need to do anything with the IAB what all needs to be done with that.
one more thing.
since my car is setup with external coil, and this engine is coming with internal coil, wont my f22b2 Dizzy work or no because of it being OBDII? (does that make a difference?)
thanks a lot!