wore out your soles because SUPER GRIPPY

 

well it's basically sandpaper
shoes have some grip already. Don't need glue pedals


dead pedal is at 76%

soft pla has to print real slow. 20 mms
Been about 4 hours already

 

 

Painted my printed centercaps

 

Hey,

Made this mount for my map sensor, since I deleted my charcoal canister assembly I put the sensor in it's location.

My spool was snagging so the quality really suffered, but it works fine still.

I can mod the design to hold other sensors. If any one wants to purchase one.






I also deigned this one, that bolts where the purge valve was

 

That's pretty damn cool.

 

Yea, thanks. Decided it looks better down there, also, I thought the heat would warp it, so far it's still held.
Going to print these to hold my wiper cowl down.

 

 

Make some door molding clips. I'll buy some

 

the press fit ones? I can't make those, the plsastic does not flex well. ONky ones that are tapped.
If they're tapped, give me the dimensions and I can make you a bunch

 

Yeah, the press fit ones.

 

Take a photo of one. I'll make some and test them.


made these.

 

For today

 

 

Cool, I did this recently too, except i mounted it where the fuel filter used to be:





I just ordered the same part from shapeways in black sintered nylon, it's a much nicer material and if you orientate it well there's virtually no stepping.

Good to see someone else using 3D printing on their builds!

 

That's a cool mount. I believe that's where the fuel line braces to right? Does the wiring reach there?
I never would have thought to place it there, I still have my oe fuel lines.

I wonder how much demand there is foe any mount like these, as any swap would place the sensor on the throttle body.

And yea, I see no problem using t3d prints on cars. As long as it's safe and such

 

I think you're right, or it's where the fuel filter bolts to on. I'm running a rywire harness, so it does. I moved it there because the supercharger needs a proper boost pressure reading, so if it was mounted to the throttle body, the reading wouldn't be as accurate as if it pulls a reading after the blower.

 

Sup though,
rep for bisimoto
since I'm sohc

 

 

Made more key covers
and a porsche

Any interest for a honda key cover? I know at home depot the key comes with the 27R logo and sometimes those honda blanks on ebay do not work.

 

 

Just finished printing these for the 90-91 bumpers

Late here but I will test them out tomorrow.

 

 

Wadup doe

 

updated my centercaps