** The offical 96-00 civic 4dr thread ** PART 3
The car has been repainted at Maaco which is not bad and a dent in the passenger quarter panel. I will try to post pictures soon after I wash it and stuff.
Any of you sedan guys still D-Series guys?? I figure I'd offer these up here first. Was gonna use them to prep the cooling system for the new motor, and get the tuck radiator installed, but the old motor and I broke up, so I no longer need these parts. Let me know, make an offer, add some shipping, and make sure they get a good home. T-Stat housing and front water hose outlet for a D16Y8, welded with -16an fittings, and an integrated radiator cap. Was gonna use these with a Rywire tuck radiator for the J-Swap to move the radiator forward.
I have a 99 Honda Civic hatchback cx with a jdmD16a. How and where is the bleeder for the clutch? I can tell there's air in the lines but can't find the valve to bleed it any help would be great full.
To fancy Jacob.
Still haven't got around to installing the rear bumper, but definitely need to get the wing back on my accord.
Still haven't got around to installing the rear bumper, but definitely need to get the wing back on my accord.
Any of you sedan guys want a 99-00 trunk and tails? It's Clover green...kinda...but it's free if you come get it. Also have an EL bumper that is cypress green with a hole punched in it. Could easily be cleaned up and filled. Also free if you come get it.
Last edited by Cobb2819; Apr 6, 2017 at 07:53 AM.
Oh Im going to miss this car.
If anyone is interested in Domani / acura 1.6 EL parts. Let me know .
will have heated manually foldable mirrors with the dash switches
Gauge cluster
rear trunk and lights
If anyone is interested in Domani / acura 1.6 EL parts. Let me know .
will have heated manually foldable mirrors with the dash switches
Gauge cluster
rear trunk and lights
98 d16y8
tranny problem
grinding noise when gear is engaged and stepping on the gas. Goes away when I let go of the gas. Sounds like if something is spinning with the flywheel at the same time
tranny problem
grinding noise when gear is engaged and stepping on the gas. Goes away when I let go of the gas. Sounds like if something is spinning with the flywheel at the same time







