What fuel are you planning on running? Are you sure that the DB2015 is enough pump for the power you're looking to make?

 

for now e85. and yes for now it will be I can only make so much on a non sleeved block lol.

 

last few things ordered. I need to stop now lol should be good for now

 

So is your plan for 680whp on stock sleeves or are you planning on doing sleeves and then shooting for 680whp? The reason I was asking about the fuel pump was because I am not sure it will handle 680whp if using Ethanol.

 

600-650 more realistically non sleeved. later on 700+ sleeved of course.

 

Are you still going for the skunk2 intake manifold and throttlebody?

 

not for now. if AZ_CIVIC made 1000+ on the one he had on which he took off recently which is the same intake mani I have just not ported I don't see the need to for now. since will only be at 600-700 anyways. ill look info maybe if I can use a 74mm tb instead of a 70mm if there are any gains or if its even worth it. Aside from that ill keep that set up as it is for now.

I just ordered a twin disk and front brakes so wont buy an IM til later If so

 

Yeah my manifold is only port matched for the throttle body and the runners haven't even been touched. If your looking for a 74mm throttle body let me know, mine will bolt right up to that manifold I also have the 4 bar map sensor on it as well.

 

mhmm

 

this is mines

 

Very solid build indeed. Nice colour scheme too.
​​​​​​​good luck

 

thx. blue is for my pops and colon cancer he had and pink my aunt for breast cancer.

not much updates aside from car going to fabricator for manifold and intercooler along with exhaust next week and the other goodies like booster tuck, coolant reservoir, hood lashes, radiator, Weldon fuel pump and anything else that might come up

 

what is the expected timeframe it will be there?

 

maybe a week or so just depends if I don't keep adding things to do on it lol

 

got my ecu back from v3 upgrade.

now that I have a cop kit I need to sell the billet plug cover I had just gotten lol and the ngk wires

 

got ecu with the upgrade

 

time to sell my block

 

What's wrong with your block?

 

This ^^ What's up?

 

it don't have sleeves and found a sleeved one :D

 

was gonna txt u earlier but didn't want to wake u lol let me find ur txt thread and txt u

 

At least with the block you will be able to exceed your power goals and still be safe.

 

indeed sure will. trying to get this head with full ferrera goodies and then sell my head too

 

I wouldn't. With the fact that now these cylinder heads are becoming rarer, combined with the fact that you're drag racing . You'll need that head sooner than you could gain from the proceeds of selling it.
Keep those parts/ cylinder heads. You'll need them.

 

umm true