When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Did a little refresh on mine. Shaved it a little too.
OFC I fucked up the paint in the lower middle portion... Fixed it, ish. Skunk2 Anodized hardware seeps oil...unless you put a little RTV in here. Once you tighten them all down, just wipe off the excess. 5k and zero seepage. Don't mind the missing nut on the spark plug cover. I am replacing those four nuts with something else later anyway. Finished product with my custom headlight intake attached getting ready for the strip.
Haven't painted mine yet but will I be good with using a high heat primer for a base coat then top it off with any color of my liking without experiencing any chipping?
Haven't painted mine yet but will I be good with using a high heat primer for a base coat then top it off with any color of my liking without experiencing any chipping?
I used duplicolor wheel coating And haven't had any issues, as well as on my old D series i used regular paint and had no issues with that either.
Mar 25, 2015, 09:48 AM
Re: Official: Post Your Valve Cover (56k warning)
Re: Official: Post Your Valve Cover (56k warning)
