Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.


From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings

EVERYTHING HAS TO HAVE PICS NO exceptions

 

All Skunk2:
K series black intake manifold (test fitted but never used, brand new not in box)- $400+shipping
Kseries composite fuel rail BNIB- $150
K2B TB adapter BNIB- $35
K2H manifold aadapter- 80$

If you need/want any of these items please click on this link to my FS thread for specific details/pics:
https://honda-tech.com/sale-10/trace...-bnib-3269549/
^^^good vouches for me in here, too

EDIT: no more lowballers, these prices are already crazy low so get out of here with the lowballing

 

Motec m84 with advance functions unlocked. 1600
Motec m800 with advance functions unlocked. 3500

 

K Series AEM V2 BNIB - $1100
AEM Serial gauge BNIB - $150

832-875-1213 for faster response

 

PM or text 917273443one,greg


Mini fluidyne race radiator... $best offer



Carbon fiber lean mount intake for any size Kinsler ITBs... $500



RSX shifter box with used Karcepts shifter plate and Razo short shifter... $126



Use clutch type K series LSD unknown brand but similar to Spoon/Mugen/ATS/KAAZ etc. With speed sensor with drive gear... $500neg



Brand new XS 16volt racing battery with charger $make offer

 

FYI...ur image links shows nothing regarding the products you are selling...only del sol lights and prelude pics LOL

 

Fluidyne Dual core half sized aluminum radiator with Blox 12" slim fan and black silicone race Samco hoses. Was used on my turbo GSR without any issues. Never seen any overheating and does not leak! SOLD

 

text me for fastest response.
316-308-four three six nine
cp pistons 9:1 81.5mm upgraded wrist pin. $600
twin scroll sls manifold dual 44mm wg sold
sheepey ff manifold sold
skunk2 eg camber kit only mounted. sold
sheepey ff intercooler 12x18x4.5 new 800 shipped
single 044s with fittings 200 shipped
bargwarner turbo 950 shipped
gsr carbon syncros sold
round 2 motorsports wing for eg coupe 200 shipped
aem cam gear 175 shipped
t1 back door intercooler 650 shipped

 

*Please Read Whole AD*
1) I will not part out any of the packages do not PM me asking to sell you 1 rim/tire. If they are posted together in a package with a total price they will NOT be separated.
2) The prices are firm if you do not like them please do not PM me, if you offer less then my asking price I will not respond.

I have bought and sold lots on here so buy with confidence. I can provide numerous vouches if you require. All prices are shipped and in US dollars you must pay paypal or send as a gift. I am located in Canada but do not let this stop you from buying. Do not bother lowballing me I will completely ignore them. If you don't like the prices feel free to buy elsewhere.

Text or pm 306 551 5139


- Eg rolling shell - $3200NO PART OUTS ON THIS ITEMS LISTED BELLOW
$7000 Brand new eve red paint exterior and interior not engine bay though with new $3000 oem Honda inner and outer quarter panels
carbon fiber doors
skunk2 coils
skunk2 mega power exhaust with hks cf ti muffler
aftermarket steering wheel, gauges + more
Takata harness
sparco harness bar
cf towel
cf rear strut bar
sir cluster with 26,000kms
cf Hood, trunk duck bill
+more

NO rims, Fuel lines, Fuel tank, Brake lines, seats motor or fenders they are all gone or

- fuel AN line and fittings purchase from brfittings.com
Pro flow 300 series black nylon braided line x 18' of -10an - Retail $135 will sell for $120
Pro flow 300 series black nylon braided line x 13' of -10 - Retail $97.5 will sell for $80
Pro flow 300 series black nylon braided line x 13' of -8an - retail $84.5 will sell for $70
4 x Black 10an fitting straight - retail $40 will sell for $30
3 x Black 10an fitting 90 degree - Retail $51 will sell for $40
3 x Black 10an fitting 45 degree - Retail $51 will sell for $40
1 x Black 8an fitting straight - retail $8 will sell for $5
1 x Black 8an fitting 90 degree - retail is $15 will sell for $10

- Kirkley Drag Seat with rail that bolts to the floor with cover(is dirty needs just a vacuum very little use) - $270 shipped

- BNIB Hybrid racing gauge - $30 shipped

- FCS Fuel cell 9 gallon Brand new never mounted comes with fittings shown - $650 shipped

- Legit Bride Carbon Fibre bucket seats No rails(The passenger side has some new fabric put on the one side it does not quite match) - $1800+ shipping

- Tig welded Intercooler mounting bar comes with 2 bolts to mount - $150 shipped obo

- Sheepey K series brand new t4 manifold(60mm gate) 4" up pipe and Up tube will not seperate - $1100 shipped

- Honda s2000 clutch maser cylinder(replaces the ugly stock one need a spacer though) - $60 shipped

- Used AEROMOTIVE filter with fittings - $50 shipped

- Dual 044 fuel pump hanger billet steel brand new - $50 shipped

-K20z3 head not sure of shape comes with whats shows - $150 + shipping

- K24 block bare with only mains would need honing and so forth - $200 shipped

- Smax front mount intercooler with co2 bottle, lines, and actuator( allows you to run c02 directly through your intercooler will separate parts and its not 100% complete - $350 shipped
more to come

EG Shell
Before the build began

Current state



Fuel line


Drag seat

GAUGE


FCS


Bride seats


Bar


sheepey


coolant overflow


Dual Hanger


k20z3 head


k24 block


smax

 

B16 LSD Final drive Ring and pinion. MINT. Planetary broke, ring and pinion are FLAWLESS

This is for the 14 10mm bolt diff Hard as hell to find


215 shipped with tracking

 

Inline Pro CNC Kseries cylinder head with 37mm intake and bronze exhaust guides (bare). $1250 shipped in US

 

Skunk2 pro 1 degreed by previous owner but never ran. Still have original boxes. One is marked x and the other p1v. Not sure why. Text me for pics. I don't want to post 10 detailed pics here it'll take too much space. 6235479712 $500 obo shipped and pp


AEM wideband nib $160 shipped and pp

Hondata s300v3 $450 shipped and pp.

 

For sale Carrillo rods pro-A beam 421grams/rod,comes with carrillo bolts for LS B18A/B and B20's in exellent condition,super low miles around 25-30 miles,absolutely nothing wrong with them $590 shipped and paypal ready


For sale brand new 100% authentic dual bosch 044 fuel pumps hold up 850whp+ $375 shipped and Paypal ready

 

What happen to the April FS thread? LOL