Had to dig it up from a post months back:

Front Left 12.15" Right 12"
Rear Left 12.15 Right 12"

Those measurements made with a level and measuring tape.

Progress CS-II 350/350
22mm Progress Anti-Roll bar
22mm Front swaybar
Function7 Subframe brace
Volk CE28N 16x7 +33
205/45/16 Yokohama S. Drives
Camber is 1.6 in the front, 1.4 in the rear
Total Toe is .04 out in the front, .05 in in the rear.

I bolded the new stuff. The S. Drives are an amazing tire.

 

The first picture I had it them set at 11.75 but it was rubbing quite a bit in the front with my balloon tires lol.. The last 2 pictures are where it is now with no rubbing and it handles great. It is set at 12.25 front and rear with the 350 springs front and rear as well. So far I love them it is a little stiff in the rear on the highway but I like it.

 

Thanks to both Libertariat and Campin Cracker for posting the photos...

12.25" is right in the sweet spot for ride height.

 

Libertariat, is that 22mm front bar an OEM unit from a Civic Si?

IMO, that's the nicest OEM front bar for this chassis.

 

I believe the 22mm is the OEM bar for the EX/LX civics. The EM1 had a 26mm IIRC.

And yes, I like the bar a lot. Definitely did some much needed tightening of the front end. The 350 rear rates with a 22mm bar and no front bar felt lopsided.

 

I stand corrected on 22/26mm OEMs. YES, 22 on EX/LX. Either is a good choice for applications without an OEM front anti-sway.

 

Good morning! Replied to early Monday PMs.

 

Monday afternoon bump...

 

Replied to PMs.

 

Bump...

 

Curious about this setup. I've pondered a front bar while most say its not necessary. ITR, one of the best handling FF cars ever, ran front and rear so it seems wise. My setup is similar to Libertariat except 350/250 with 22mm rear Progress bar.

Thoughts?

 

Hi Russ. With street-oriented applications, the oem front bar is a plus. With aggressive driving, track use, or high boost, the front bar can induce inside front wheelspin. Like so many topics here, there is no simple response. I am posting from our booth at the PRI show in Orlando.

 

Replied to weekend PMs. Thanks for your interest here.

 

CS2 systems are in stock, but inventory is getting low. Order now if you neeed a system soon...

 

Replied to PMs..

 

Here in Orlando!? Had I known I would have come out and met you all. You've been great! Thanks again for everything!

 

You would have enjoyed the PRI show... gearhead central!

http://www.performanceracing.com/tradeshow/

 

Replied to PMs...

 

bump...

 

Replied to weekend PMs. THANK YOU for the recent orders.

 

https://honda-tech.com/forums/suspension-brakes-54/progress-csii-struts-rear-swaybar-how-review-3006802/
This thread won me over on purchasing the cs2's so I decided to write a little how to and review on my progress products! HOPE IT HELPS!~

 

Nice work sixtoes! Thanks for taking the time to create the build thread. Cheers!

 

Replied to today's PMs.

 

Replied to the PMs from this morning. Our Black Friday specials are still running thru 12/31. Enjoy your Holiday shopping weekend!

 

Replied to weekend PMs...