I just noticed now how bent in his oil pick up is on the first page, lol.

 

Best write-up I've ever seen. This is what I followed back in '07. Dunno why this hasn't been sticky'd yet.

 

of course his damn ecu was plug in and go lol... can someone explain how to go from obd2b to an obd1... cause thats what ill prolly do :/

 

Halo...bro can use this setup into my zc dohc engine?How about the piston?and what is the
running boost,a/f ratio..i'm from malaysia..and need your advise to boost my engine..my car is civic ef 2 swap zc dohc engine from ef7(crx)

 

http://www.hamotorsports.com/obd2btoobd1.html

that's what I used, except bought it from skunk 2. have fun

 

well ive talked to a couple people and thats what im doin... a p28 ecu and obd2b to obd1 swap... my main concern now is the ivac on an obd2b, like how to rewire it, and its if an hx needs to... but besides that, i hope its as easy as it sounds... ive already got my old ecu out of place on the floorboard so all i gotta do is unplug it and switch it... im payin for my turbo and gettin it piece by piece and the blow off valve was the first and its the hks version

 

well i learned one thing.... the oil pressure sensor isnt a 21mm... its a 24mm from another sit a read at..... and i tried a 21mm and wouldnt come off.. and of course its christmas and cant get another socket

 

nice write up, very helpful

 

but yes it is helpful im usin this to do mine right now

 

great info this is only my first week into turbo exploring... what about the internals?... porting low comp pistons. uk any of that needed?

 

Do more research. It's not a simple question to ask. Certain engines are safe up to a certain point without internal modification.

 

great write up

 

lololol skill level of 7-9 with this thread you could be borderline slow and get it right! jk but very nice thread captain!

 

nice write up

 

This is great dude. its like the walmart of all turbo info. one stop shop.

 

an old thread worth the bump. that guy really did a nice write up.

 

Definitely worth the bump :D

However the pics seem to be offline, they are kinda essential for the write up.
So if anyone could please? Thanks ^^

 

Bandwidth is exceeded for the pics, that's all. Pics will be up after a while. I used to have this mirrored on my site but got hacked.

 

Have offered this before, and offer it again - I am willing to host this thing as a web page for free, so just ask It'd be a shame to lose a guide like this.

 

I already did. I just have to get it back up and running.

 

Awesome :D

 

same here on hosting. detailed easy to follow write ups can get posted on www.turboinstall.net there's a really good article on swapping your drive axles posted here http://www.turboinstall.net/general-...a/drive-axles/, my own turbo build will be done by the end of summer as well as a clutch how to.

 

Quick and dirty until I can fix it up.
http://www.rosswerkz.com/tutorials/turbo_car.htm

 

Not trying to bring back old threads but its funny to look at this now cause i got a lot of info from it wayback.

 

great write up!!!!!!!