alright, i checked up on some threads and i found one that had some info in it, but i just want some clarification.

apparently the hub from the electric hybrid (the part number was listed in the other thread) is 4x114.3 and it fits. the bearing that goes with it is the integra wheel bearing (part number is listed too)

so is it as simple as knocking out your hub, replacing the bearing and pressing in this hub, then finding a rotor the same size as your stock one, albeit drilled with the 4x114.3 pattern? i believe it is mentioned in that thread that the non-vtec bb4 prelude rotors fit.

or of course at that point you could bolt on the prelude brakes...


let me know. thanks.