FS - Stack Dash, Data Logger, and Expansion Module
SOLD

ST8100: Configurable Dash Display System
+
ST8900 "Engineering Systems" Expansion Data-Loggers:
- ST8906 8 Inputs, 45 Channel, 200Hz, 8MB Engineering System
Consists of:
- Main display w/ milspec harness (ST867)
- Expansion Module (ST841)
- Recorder Module (ST826-8)
- G Sensor (ST791)
- Lap timer (ST543)
- [2] Accelerometers (used for shcok travel)
* Have no way to verify 'Predictive Lap Timing', but appears enabled.
Reading:
http://www.stackltd.com/pdf/brochure...a_brochure.pdf
http://www.stackltd.com/modular_engineering.html






If it's good enough for the Koenigsegg CCX...:

ST8100: Configurable Dash Display System
+
ST8900 "Engineering Systems" Expansion Data-Loggers:
- ST8906 8 Inputs, 45 Channel, 200Hz, 8MB Engineering System
Expansion Module (ST841)
"directly measure 0-5 volts, 0-333 Ohms inputs, or a pulse frequency up to 40kHz. Each input can be sampled at up to 200Hz"
..."e.g. for Suspension, Strain Gauge, RPM, Thermocouple, etc"
Recorder Module (ST826-8):
“R” Module 30 Recording channels 200Hz per channel 8 Mbytes Memory"
CAN bus support
"directly measure 0-5 volts, 0-333 Ohms inputs, or a pulse frequency up to 40kHz. Each input can be sampled at up to 200Hz"
..."e.g. for Suspension, Strain Gauge, RPM, Thermocouple, etc"
Recorder Module (ST826-8):
“R” Module 30 Recording channels 200Hz per channel 8 Mbytes Memory"
CAN bus support
- Main display w/ milspec harness (ST867)
- Expansion Module (ST841)
- Recorder Module (ST826-8)
- G Sensor (ST791)
- Lap timer (ST543)
- [2] Accelerometers (used for shcok travel)
* Have no way to verify 'Predictive Lap Timing', but appears enabled.
Reading:
http://www.stackltd.com/pdf/brochure...a_brochure.pdf
http://www.stackltd.com/modular_engineering.html






If it's good enough for the Koenigsegg CCX...:
Last edited by FritzInTN; Dec 4, 2010 at 12:36 PM.
Thread
Thread Starter
Forum
Replies
Last Post



