Everything needed for Ls/Vtec
Thread Starter
Joined: Apr 2004
Posts: 18
Likes: 0
From: Lakeland, Florida, United States
Everything needed for Ls/Vtec
Hey I have everything you need to convert your Ls block into an Ls/vtec
this includes
-'01 Gsr vtec Cylinder head
-Complete Intake manifold (with obd0 injectors)
-ITR pistons
-Ls heat-treated rods
-Gsr Oil pump
-Ls/Vtec oil line
The head is already tapped for the oil line and blocked off on the bottom, the holes are also drilled out for the dowel pins. this is complete I just took it all out of my crx and put it on my table. Looking for 750 for the whole setup. If your intrested call me at (863) 370-7103, and we can talk about it. thanks -Ben
this includes
-'01 Gsr vtec Cylinder head
-Complete Intake manifold (with obd0 injectors)
-ITR pistons
-Ls heat-treated rods
-Gsr Oil pump
-Ls/Vtec oil line
The head is already tapped for the oil line and blocked off on the bottom, the holes are also drilled out for the dowel pins. this is complete I just took it all out of my crx and put it on my table. Looking for 750 for the whole setup. If your intrested call me at (863) 370-7103, and we can talk about it. thanks -Ben
Thread
Thread Starter
Forum
Replies
Last Post
