DC Race Header
#1
Honda-Tech Member
Thread Starter
Join Date: May 2000
Location: Largo, Fl
Posts: 1,278
Likes: 0
Received 0 Likes
on
0 Posts
DC Race Header
Stainless, Burns collector 2.5", no dents or scrapes. its dirty in the pics, but I will clean before I ship. This bolted up to my exhaust on my ITR, elimintes test pipe/cat.
$650 shipped.
scott
$650 shipped.
scott
#6
Honda-Tech Member
Thread Starter
Join Date: May 2000
Location: Largo, Fl
Posts: 1,278
Likes: 0
Received 0 Likes
on
0 Posts
Re: DC Race Header (MrMike)
its about 5" around the pipe and the ports are 2"x1 1/2". These are approx., I just went out and measured them with a tape measure.
scott
Modified by scooter at 10:53 AM 7/25/2004
scott
Modified by scooter at 10:53 AM 7/25/2004
#7
Honda-Tech Member
iTrader: (3)
Join Date: Jan 2000
Location: Bloomington, IN, USA
Posts: 10,180
Likes: 0
Received 3 Likes
on
3 Posts
Re: DC Race Header (MrMike)
If the primaries are the same gage tubing as the coated mild steel ones, then it's 1.778" OD. Maybe a bit less if you discount the coating thickness.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
thanatos2k
All Motor / Naturally Aspirated
4
07-15-2003 10:15 AM