Do not lowball me….. If you do not like my prices, buy it from someone or somewhere else. If you have any questions please feel free to pm me.

Sparco EVO Seat w/brackets (Driver Fits DC & EG) $375.00 Pick up Only!!! (SOLD)
Vortex FMU $40.00 (Vortech 12:1 Fuel Regulator) (SOLD)
Rear Door Handles for EG6 $40.00
Brand New Power Slot Rear Rotors (ITR 5 lug) $80.00 for both
P07 ECU $40.00
P73 ECU $60.00 (SOLD)
P2T ECU $30.00
EG '92-'95 Civic Hatchback Inner Tail Lights $30.00
Simpson Helmet (Bandit with Nomex® lining) $150.00
Xtant Amp 25x2 $30.00
Brand New Pioneer 6x9 Speakers $25.00 (STOLEN)
HASport Motor Mounts For EG6 (88A Urethane / Rear Mount Only) $50.00 (SOLD)
JDM DC ITR Front Sway Bar 24mm $45.00 (SOLD)
Beaks Rear Sway Bar Reinforce Kit (Brand New) $40.00 (SOLD)
JDM DC ITR '96 Spec Rear 22mm $45.00 (SOLD)[/B]
Unorthodox Racing Aluminum Alternator Pulley Brand New $35.00
GReddy Extreme Timing Belt B18C5 $70.00 (SOLD)
2-5/8" Gauge Cluster $20.00
Greddy Oil Cooler Block Adapter with (Thermostat Internal Switch) and 4' of line $50.00 (SOLD)
Misc Motor Mounts for B-series (make me an offer)
EG E-Brake Cover $5.00 Each
Honda Hood Cable w/latch for EG6 (Brand new) $25.00
B-Series Stock Cam Sprockets $20.00 (SOLD)
Honda Air Conditioning Pully and Clutches For EG6 $75.00
Misc Fuel Lines $10.00
Misc Wire Harness $65.00 for all
GSR Alt / Starter $20 Each(SOLD)
ITR (4-1 Header) Upper Exhaust Shield $25.00
Misc Iceman intake tubes $10 Each

Auto Meter Mechanical Gauges 2-1/16 (All Sensor Included!! Never used the sensors!!)
Water Temp $30.00
Boost $30.00
Oil Temp $35.00
Vaccum $30.00
Blitz EGT $50.00 (SOLD)

Sparco EVO Seat w/brackets (Driver Fits DC & EG) Sold!!!!!


Vortex FMU $40.00 (Vortech 12:1 Fuel Regulator)



Rear Door Handels for EG6 $40.00


Brand New Power Slot Rear Rotors (ITR 5 lug) $80.00 for both


P07 ECU $40.00


P73 ECU $60.00 (SOLD)


P2T ECU $35.00


EG '92-'95 Civic Hatchback Inner Tail Lights $30.00


Simpson Helmet (Bandit with Nomex® lining) $150.00



Xtant Amp 25x2 $30.00


HASport Motor Mounts Kit (88A Urethane / Rear Mount Only) $50.00 (SOLD)


JDM DC ITR Front Sway Bar 24mm $45.00 (SOLD)



Beaks Rear Sway Bar Reinforce Kit (Brand New) $40.00 (SOLD)


JDM DC ITR '96 Spec Rear 22mm $45.00 (SOLD)



Unorthodox Racing Aluminum Alternator Pulley Brand New $35.00


GReddy Extreme Timing Belt B-series $75.00 (SOLD)


2-5/8" Gauge Cluster $20.00 (CLUSTER ONLY NO GAUGE)



Greddy Oil Cooler Block Adapter with (Thermostat Internal Switch) and 4' of line $50.00 (SOLD)



Misc Motor Mounts for B-series (make me an offer)



EG E-Brake Cover $5.00 Each


Honda Hood Cable w/latch for EG6 (Brand new) $25.00


B-Series Stock Cam Sprockets $20.00 (SOLD)


Honda Air Conditioning Pully and Clutches For EG6 $75.00


Misc Fuel Lines $10.00


Misc Wire Harness $65.00 for all




GSR Alt / Starter $20 Each (SOLD)



ITR (4-1 Header) Upper Exhaust Shield $25.00
Misc Iceman intake tubes $10 Each


Auto Meter Mechanical Gauges 2-1/16 (All Sensor Included!! Never used the sensors!!)

Water Temp $30.00 (SOLD)


Vaccum $30.00


Boost $30.00 (SOLD)


Oil Temp $35.00 (SOLD)


Blitz EGT $50.00 (SOLD)





Modified by N_V_S at 3:31 PM 10/11/2006

everyone pmed

1

2

Wouldn't happen to have a obd1 gsr engine harness?

Honestly, I do not know what kind of harness I have. I collected them over the years. I have had a 95 GSR motor, a two (95 and 91) D16 motors, and two (97 and 98) Type R motors. I did not mark the harness so I do not know which motors they came from.

3

pmed everyone back

4

pmed everyone.

5

6

THAT SEAT!!!... is already sold...... damn. too late...

Sorry.

asdasdf

what years are the gsr starter/alt from?

The starter and alt is for a 95 GSR

do they both work/not on their deathbed? if so, ill offer 50$ shipped to 04008

Yes, they both work.

payment has been sent.... bump for you

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chrisfletcher &raquo;</TD></TR><TR><TD CLASS="quote">payment has been sent.... bump for you</TD></TR></TABLE>

Your things will be sent out today. I will pm you with the tracking number when I am done. Thank you.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by N_V_S &raquo;</TD></TR><TR><TD CLASS="quote">

Your things will be sent out today. I will pm you with the tracking number when I am done. Thank you.</TD></TR></TABLE>

Tracking number sent!!!!

1

pm'd

pmed