I have an 87 CRX Si on to which I have in the last 10 days installed Tolico Illumina 5 ways, and GC coilovers with Eibach 450 lb. springs on the back, and dropped the car about 1 1/4 in. Was taking the car for an alignment ( my low tech attempts not too good) when I noticed the right GC cylinder (the threaded part at the bottom had two longitudenal 1/4 in. cracks estending up from the bottom - they were about 1 in. apart.

Don't remember any ugly bumps and nothing like that on the left. Pretty sure everything perfect on the install......

I am sending it back to GC for inspect.