When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I race an EG Civic with a J30A4 swap ... the ONLY one here in Australia. I am trying to find a supplier of high compression pistons for it. J32 & J35 cannot be used because if I change to over 3 liter class I'm in with 600bhp V8's. I can find pistons for those larger engines, but nothing for the J30. Does anyone know of a good supplier who'll ship overseas?
I’ve seen your stuff on YouTube! Just liked your Facebook page.
I really haven’t been in the Honda scene but since about last January. My first swap was a B18C1. From January 2017-September 2017, I went from a D16 Auto to a B18C1 to a B20Z to a J30A4... I learned a lot, but still have a lot to learn!
Rods and crank from an Odyssey will fit if you think about stroking it to a J33. Don’t know if stroking that will bump you up a class or not. I’m not a racer, and don’t know if you could get away with that without getting in trouble.
https://www.serco.com.au/
I now this is a older they thread but may help you in the future.
Serco is a bike deal but they are a big time importer of Wiseco, they may be able to save you some money and have the product you want added to there stock order.
They go way back with the Wiseco family and were always around the Wiseco booth at the trade shows.
I failed t mention part of the whole Wiseco group is now, JE piston, Wiseco, Diamond piston,Pro-X piston.
Specializing in customs. so if if not on the shelf they can make it for you on some very fine dedicated forgings.
06-17-2018, 03:31 PM
J30 high compression pistons
