>>>SUPERTECH PISTONS = SUPER DEALS<<< HARDPARKED.com
Thread Starter
Joined: Aug 2011
Posts: 4,743
Likes: 0
>>>SUPERTECH PISTONS = SUPER DEALS<<< HARDPARKED.com
Email me for a Set (4) of Supertech Honda/Acura PISTONS & RINGS shipped within the Continental United States,inventory and shipping quotes outside the Continental United States including HI and AK
Email:sales@hardPARKED.com
"Supertech pistons are manufactured in Argentina with technology transferred from European manufacturers.
Our pistons are manufactured from extruded high silicon, enhanced 4032 alloy (with additional Cu, Ni & Mg) that has low thermal expansion, excellent wear resistance and higher thermal conductivity. Our pistons with this alloy have withstood up to 42psi of turbo boost, with alcohol, without any problems.
A 2 or 3 forging steps process yields a fine structural grain oriented in fibers in the same direction of the stresses.
Several heat treatments provide the piston with a high tensile strength and evenly distributed hardness. The pistons are submitted to several machining steps in specially designed machines and in conventional CNC. machines with special diamond tools for dimensional precision, perpendicularity and flatness of the ring grooves. Contact reduction grooves are standard. Honed & reamed pin bores for precise fit.
Wrist pins are constructed of cold extruded chrome moly steel for high strength to be used with wire clip locks"
Email:sales@hardPARKED.com
"Supertech pistons are manufactured in Argentina with technology transferred from European manufacturers.
Our pistons are manufactured from extruded high silicon, enhanced 4032 alloy (with additional Cu, Ni & Mg) that has low thermal expansion, excellent wear resistance and higher thermal conductivity. Our pistons with this alloy have withstood up to 42psi of turbo boost, with alcohol, without any problems.
A 2 or 3 forging steps process yields a fine structural grain oriented in fibers in the same direction of the stresses.
Several heat treatments provide the piston with a high tensile strength and evenly distributed hardness. The pistons are submitted to several machining steps in specially designed machines and in conventional CNC. machines with special diamond tools for dimensional precision, perpendicularity and flatness of the ring grooves. Contact reduction grooves are standard. Honed & reamed pin bores for precise fit.
Wrist pins are constructed of cold extruded chrome moly steel for high strength to be used with wire clip locks"
Last edited by HardParkedCom; Aug 16, 2012 at 08:43 PM.
