Valve Cover Repaint
#1
Valve Cover Repaint
Recently went through my old pictures. Every picture has a story. Car was already making around 380hp at that time and the blow-by crankcase pressure was pushing oil out every "hole". Had (2) 10AN fittings welded to the valve cover for a catch can. Obviously ruined the paint so I decided to repaint it using VHT SP204 Wrinkle Paint:
#2
Moderator
iTrader: (14)
Re: Valve Cover Repaint
Nicely done. Or, you could have avoided the entire -10AN fittings valve cover style in the 1st place.
How to have a proper catch can setup without those silly -10AN fittings on the Valve Cover
How to have a proper catch can setup without those silly -10AN fittings on the Valve Cover
#3
Re: Valve Cover Repaint
Thanks for the feedback! I ended-up removing it all together after awhile. Venting it through exhaust now. Works great, though it does smoke a little
Last edited by BuiltnotboughT2; 04-17-2019 at 04:03 PM.
Thread
Thread Starter
Forum
Replies
Last Post