DC2 Shell
Well got tired of trying to part it out so I will just see if I can get rid of it as a whole
Car came from VA has rust on the passenger side quarter.Could use a new drivers side door.Key works but steering wheel doesnt lock cause car had a failed gta.Car was backed into by a truck and hitch pushed in the bumper support alittle and bent up the metal behide it does line up.Will need a passenger side tie rod end I was dding the car around and before I parked it it was getting alittle loose and a drivers side turn signal light.Also I would restud the car.I started to take stuff out such as srs system,airbags,Heater core and blower motor was going to make into a track car but I just dont have the time,money,or drive to continue with the car due to hopefully relocating soon .Car will come with the dash harness and everything else you could easily track or dd this shell.only interior pieces missing are the rear panels.Car does need put back together such as bumpers(front bumper is a 98+ style) put on and few other minor things but in time I might have it back together.Please pm me or post here with any questions it might take me a day to get back so heads up cause I know some people cant wait. Asking 1000obo
I am located about 1hour south of Pittsburgh



This is the worst of the rust and pretty much the only bit
Car came from VA has rust on the passenger side quarter.Could use a new drivers side door.Key works but steering wheel doesnt lock cause car had a failed gta.Car was backed into by a truck and hitch pushed in the bumper support alittle and bent up the metal behide it does line up.Will need a passenger side tie rod end I was dding the car around and before I parked it it was getting alittle loose and a drivers side turn signal light.Also I would restud the car.I started to take stuff out such as srs system,airbags,Heater core and blower motor was going to make into a track car but I just dont have the time,money,or drive to continue with the car due to hopefully relocating soon .Car will come with the dash harness and everything else you could easily track or dd this shell.only interior pieces missing are the rear panels.Car does need put back together such as bumpers(front bumper is a 98+ style) put on and few other minor things but in time I might have it back together.Please pm me or post here with any questions it might take me a day to get back so heads up cause I know some people cant wait. Asking 1000obo
I am located about 1hour south of Pittsburgh



This is the worst of the rust and pretty much the only bit
I am in need of the rear bumper reinforcement (if its not bent) and the bumper cover support. If your willing to let those go separate, I'm around the Greensburg/Irwin area. Let me know
Thread
Thread Starter
Forum
Replies
Last Post
alexisthemovie
Honda / Acura
12
Oct 2, 2007 01:11 PM
samaccord
Honda Accord (1990 - 2002)
5
Aug 16, 2003 06:23 PM



