wiring help
#1
Honda-Tech Member
Thread Starter
Join Date: May 2001
Location: memphis, TN, united states
Posts: 903
Likes: 0
Received 0 Likes
on
0 Posts
wiring help
this is what i have. 93 cx with jdm b16, using a p30 ecu, and a del sol vtec engine harness.
now that we have that out of the way. i need to know where to put the knock sensor, vtec solenoid, and vtec oil pressure wires. from the ecu to the 3 connectors on the strut tower. what are the pin locations? and how are the pin locations read on the 3 connectors on the strut tower? i know how to read them on the ecu. just not at the other end.
now that we have that out of the way. i need to know where to put the knock sensor, vtec solenoid, and vtec oil pressure wires. from the ecu to the 3 connectors on the strut tower. what are the pin locations? and how are the pin locations read on the 3 connectors on the strut tower? i know how to read them on the ecu. just not at the other end.
Thread
Thread Starter
Forum
Replies
Last Post
Dukie432
Honda Civic / Del Sol (1992 - 2000)
5
03-22-2009 10:32 AM