What is the purpose of the knock sensor?
05-27-2005, 09:55 PM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2005
Location: Halifax, NS, Canada
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
What is the purpose of the knock sensor?
I had on obdI Ls/Vtec in my 98 civic LX and I swapped it out for an OBDI JDM B16A gen2.
The LS Vtec had no knock sensor but the B16A does, how can I tell if it's wired correctly (I have followed directions), and how can I tell if it's doing it's thing.
Also I'm experiencin a bit of surging after the car warms up (not major, only 200-300 RPM) and it idles at 1500 RPM, 600 too high for my liking.
Any ideas, could this be a wiring issue?
The LS Vtec had no knock sensor but the B16A does, how can I tell if it's wired correctly (I have followed directions), and how can I tell if it's doing it's thing.
Also I'm experiencin a bit of surging after the car warms up (not major, only 200-300 RPM) and it idles at 1500 RPM, 600 too high for my liking.
Any ideas, could this be a wiring issue?
Thread
Thread Starter
Forum
Replies
Last Post
ek_b16
Honda Civic / Del Sol (1992 - 2000)
2
01-04-2005 10:41 PM
