The Time has come!!!!
#1
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Sierra Vista, AZ, USA
Posts: 2,240
Likes: 0
Received 0 Likes
on
0 Posts
The Time has come!!!!
Well its finally going to happen. I sold my B16A2 today and ordered my JDM H22 w/LSD. I can't wait. I have 90 Teg axles w/Accord half shaft, HCP mts, DC headers and a couple of other things. My main question is what EXACTLY will I have to do to my harness. My harness is already wired for the B16(I kept the harness I was running) so whats left with the wiring? I should have my motor around Wed or Thurs. Any advise is good advise. Later!!!!
#2
Honda-Tech Member
Re: The Time has come!!!! (1SICJDM)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1SICJDM »</TD></TR><TR><TD CLASS="quote">DC headers!</TD></TR></TABLE>
Sweet, Two headers are always better then one.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1SICJDM »</TD></TR><TR><TD CLASS="quote"> My main question is what EXACTLY will I have to do to my harness. My harness is already wired for the B16(I kept the harness I was running) so whats left with the wiring?</TD></TR></TABLE>
Ok, on the top of my head.
-starter wires have to be changed to H-series style
-reverese lights have to be made longer
-wire up EGR (if you want)
-Change over injector clips to H22a style
-extend/wire wire H-series low oil pressure sensor
-extend Alt. plugs
-add secondary butterflies (IABs)
-add resister box
Think thats it.
Sweet, Two headers are always better then one.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1SICJDM »</TD></TR><TR><TD CLASS="quote"> My main question is what EXACTLY will I have to do to my harness. My harness is already wired for the B16(I kept the harness I was running) so whats left with the wiring?</TD></TR></TABLE>
Ok, on the top of my head.
-starter wires have to be changed to H-series style
-reverese lights have to be made longer
-wire up EGR (if you want)
-Change over injector clips to H22a style
-extend/wire wire H-series low oil pressure sensor
-extend Alt. plugs
-add secondary butterflies (IABs)
-add resister box
Think thats it.
Thread
Thread Starter
Forum
Replies
Last Post