ricertek's F2B EJ Thread.
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: NYC/ LI
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
ricertek's F2B EJ Thread.
Okay guys I've been working on this project for a little bit over a month now. It's on its very final stages before getting swapped in my 96 Civic. I dont really post but i read alot of good stuff on this board, tons and tons of information.
INFO
'99 JDM F20B (Type S cams)
QSD H2B Kit
OEM clutch/flywheel
Innovative B series mounts
All I need is a tranny and headers plus getting rid of the 3 wire IAC. Any advice from people that have done this swap? I wanna make sure Ive done everything before it goes in. Pics below.
INFO
'99 JDM F20B (Type S cams)
QSD H2B Kit
OEM clutch/flywheel
Innovative B series mounts
All I need is a tranny and headers plus getting rid of the 3 wire IAC. Any advice from people that have done this swap? I wanna make sure Ive done everything before it goes in. Pics below.
#3
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: NYC/ LI
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Re: ricertek's F2B EJ Thread.
Anybody have an H22 intake manifold for sale? I wanna get started on the IAC. I need the fuel rail too
Last edited by ricertek; 05-03-2011 at 03:15 PM.
#5
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: NYC/ LI
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Re: ricertek's F2B EJ Thread.
Thanks man. I was at etown in NJ this past Sunday for spring nationals. I saw no one doing f2b or h2b. Just K's and B series.
#6
Honda-Tech Member
Join Date: Feb 2004
Location: Boston, MA
Posts: 1,353
Likes: 0
Received 0 Likes
on
0 Posts
Re: ricertek's F2B EJ Thread.
Thats why I feel the urge we need to group the community together. Build better networking and share our knowledge to go faster. Check link in thread. Its a start
#7
Honda-Tech Member
Thread Starter
Join Date: Feb 2008
Location: NYC/ LI
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Re: ricertek's F2B EJ Thread.
Here's the pic of the QSD adaptor plate along with the flywheel bolts. I actually had to re-order the whole bolt kit from Seth@QSD.
Thread
Thread Starter
Forum
Replies
Last Post
WOW !
Want to Buy
27
04-19-2012 05:20 AM
WOW !
For Sale
18
03-31-2012 10:19 PM