mini me swap
11-29-2003, 01:25 PM
#2
12-01-2003, 02:23 PM
#4
Junior Member
Join Date: May 2003
Location: Redstone Motors, Ca, USA
Posts: 740
Likes: 0
Received 0 Likes
on
0 Posts
Re: mini me swap (EGturbocoupe)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EGturbocoupe »</TD></TR><TR><TD CLASS="quote">does anyone know anything about the mini me swap using a d15 block with a y8 or z6 head</TD></TR></TABLE>
its a pretty basic swap, just make sure u go slow and be careful... my brother had this swap a while back and it was pretty fast.... it made 126hp and 110tq to the whells, this was with an intake, headers, flywheel and a RSR. It ran low 15's on street tires and full interior (5 lug also) so if it was in a light hatch then it would be allot faster... they can make nice power for little money !!
The write up the others posted are good also, recomend reading them a few times!
its a pretty basic swap, just make sure u go slow and be careful... my brother had this swap a while back and it was pretty fast.... it made 126hp and 110tq to the whells, this was with an intake, headers, flywheel and a RSR. It ran low 15's on street tires and full interior (5 lug also) so if it was in a light hatch then it would be allot faster... they can make nice power for little money !!
The write up the others posted are good also, recomend reading them a few times!
Thread
Thread Starter
Forum
Replies
Last Post
draperj09
Honda Civic / Del Sol (1992 - 2000)
12
06-15-2006 12:35 PM