ls/vtec
Thread Starter
Honda-Tech Member
Joined: Feb 2002
Posts: 320
Likes: 0
From: Bridgeport, CT, USA
ls/vtec
I'm very confused as to what I need to complete the LS/VTEC swap. Mainly I"m talking about the block I need to use(short or long). I've found a site with the necessary B16a head I need and they have a series of B18B1 engines for sale. Only problem is that I don't know if I need a short or longblock and what the difference is?
Joined: Apr 2002
Posts: 61
Likes: 0
From: Tucson, AZ, USA
Re: ls/vtec (WAFFLES)
I know this is kindda off the topic, but here it goes anyways.
What is the right setting for timing on an LSvtec setup? right, now my car feels so slow to me. I have an Lsvetec by the way. I just put a CTR pistons, CTR cams, and ITR Dual valve springs. I'm thinking, my timing is off. I don't know if its retard or advanced. Need help and suggestions on how to tune it. Thanks.
What is the right setting for timing on an LSvtec setup? right, now my car feels so slow to me. I have an Lsvetec by the way. I just put a CTR pistons, CTR cams, and ITR Dual valve springs. I'm thinking, my timing is off. I don't know if its retard or advanced. Need help and suggestions on how to tune it. Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
gotrice16
All Motor / Naturally Aspirated
12
Apr 15, 2009 08:58 PM
WhoNeedsBoost
All Motor / Naturally Aspirated
6
Feb 26, 2004 07:10 PM